LTC , EAN: 4013728032105

LTC H05V-K 0,75 Cable light blue RAL 5015

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

LTC H05V-K 0,75 Cable light blue RAL 5015

Lieske Part No. 382079
Mfg Part No
EAN-Code 4013728032105
Manufacturer LTC
Here only 31,10 EUR
37,01 EUR incl. VAT

Further information for LTC H05V-K 0,75 Cable light blue RAL 5015

General
Nominal voltage300/500 V
Test voltage2000 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyVDE 0472 T. 804 test type B (IEC 332-1)
Conductorbare copper, fine-stranded
InsulationPVC according to VDE 0207
Sheath colourlight blue RAL 5015
ApplicationInternal wiring, protected installation in luminaires, conduits, on and behind plaster, doorbell and signalling systems
The H05V-K 0.75 HBL RAL 5015 is a flexible PVC wiring cable from manufacturer LTC, designed for internal wiring of devices as well as for protected installations in and on luminaires, in conduits, on and under plaster. The cable is specifically designed for use in doorbell and signaling systems. It features a bare, fine-stranded copper conductor and PVC insulation in accordance with VDE 0207, with the outer sheath color specified as light blue (RAL 5015) per VDE 0293. This color coding facilitates identification within the installation network and complies with common standards for electrical cables.

Applications
This cable is suitable for use in enclosed and protected installations, for example within devices, in luminaires, or in conduit systems. It is not intended for exposed or unprotected outdoor installations, but for applications where the cable is protected from mechanical stress, moisture, and direct weather exposure. Its use is limited to doorbell and signaling systems, implying limited electrical power and voltage.

Functions and Equipment in Detail
The conductor is made of bare, fine-stranded copper, ensuring high flexibility and good electrical conductivity. The PVC insulation provides sufficient electrical insulation and mechanical stability. The outer sheath color light blue (RAL 5015) is standardized according to VDE 0293 and serves for clear identification within the installation network. The cable is rated for a nominal voltage of 300/500 V, which is sufficient for most internal wiring applications in buildings.

Technology Explained Simply
The maximum operating temperature is +70 °C, and the cable may be installed at temperatures between +5 °C and +70 °C. After installation, it can be operated at temperatures from -30 °C to +70 °C, enabling broad application in various environments. The minimum bending radius is 15 times the cable diameter, allowing flexible installation without mechanical damage to the conductor. Flame retardancy corresponds to test method B according to VDE 0472 T. 804 (equivalent to IEC 332-1), meaning the cable does not produce a flammable flame during a fire test and thus presents a low fire hazard.

Compatibility and Accessories
The cable is suitable for use with standard installation technology such as cable lugs, plug connectors, and switching devices. It can be installed in conduits, in luminaires, or within devices. Use in doorbell and signaling systems does not require any special additional components, as the cable is specifically designed for these application scenarios. Installation is carried out in protected areas, and the cable is not intended for exposed outdoor installations.

Installation and Mounting
Installation must comply with applicable standards and regulations. The cable is flexible and can be installed in conduits, in luminaires, or within devices. The minimum bending radius of 15 times the cable diameter must be observed to avoid damaging the conductor. Installation is carried out at temperatures between +5 °C and +70 °C, and the cable can be operated after installation at temperatures from -30 °C to +70 °C. The cable is not intended for use in damp or wet areas unless additional protective measures are taken.

Operational Advantages
The H05V-K 0.75 HBL RAL 5015 offers high flexibility and mechanical stability, enabling easy and safe installation. The PVC insulation ensures sufficient electrical insulation and protection against mechanical stress. Flame retardancy according to VDE 0472 T. 804 test method B (IEC 332-1) enhances operational safety. The standardized outer sheath color light blue (RAL 5015) facilitates identification within the installation network and supports structured cabling.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/382079
qrcode für LTC H05V-K 0,75 Cable light blue RAL 5015