| General |
| Nominal voltage | 300/500 V |
| Test voltage | 2000 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter |
| Flame retardancy | According to VDE 0472 T. 804 test type B (IEC 332-1) |
| Conductor | bare copper, fine-stranded |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | green/yellow according to VDE 0293 |
The H05V-K 0.5 GNGE is a flexible PVC wiring cable from manufacturer LTC, designed specifically for internal wiring of devices as well as for protected installations in and on luminaires, in conduits, on and under plaster. The cable is intended exclusively for use in bell and signaling systems. It features a bare, fine-stranded copper conductor and PVC insulation in accordance with VDE 0207, with the sheath color complying with VDE 0293 standards. The green-yellow color coding identifies the cable as a protective conductor, which is required in electrical installations for safe earthing.
Applications
This cable is suitable for use in electrical devices, lighting systems, and protected installation scenarios, such as in electrical conduits or under plaster layers. However, it is not intended for general power applications, but exclusively for signal circuits, such as those used in bell systems or other signal transmission systems. Installation must be carried out under the condition that the environment meets the specified temperature and humidity requirements.
Functions and Features in Detail
The conductor is made of bare, fine-stranded copper, ensuring high flexibility and good electrical conductivity. The PVC insulation provides sufficient electrical protection and is specified according to VDE 0207. The green-yellow sheath color complies with VDE 0293 standards and serves to clearly identify the cable as a protective conductor. The cable is rated for a nominal voltage of 300/500 V, which is sufficient for most signaling applications.
Technical Explanation
The maximum operating temperature is +70 °C, and during installation, the cable must withstand temperatures from +5 °C to +70 °C. After installation, it can be exposed to temperatures from -30 °C to +70 °C, allowing for use in outdoor environments or rooms with climatic fluctuations. The minimum bending radius is 15 times the cable diameter, enabling flexible installation without mechanical damage. Flame retardancy is certified according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), meaning the cable does not propagate flame during a fire test and thus presents a low fire hazard.
The test voltage is 2000 V, which underscores the electrical insulation strength of the cable and ensures it will not break down even under elevated voltage surges. The nominal voltage of 300/500 V is sufficient for most applications in electrical installations, particularly for signal circuits.
Compatibility and Accessories
The cable is designed for use in signaling systems and can be combined with other components such as bell devices, signal relays, or control panels. The green-yellow color coding allows for clear identification as a protective conductor, which is advantageous during installation and maintenance.
Installation and Mounting
Installation must be carried out within the specified temperature range and with a minimum bending radius of 15 times the cable diameter. The cable is intended for protected installations, such as in conduits, pipes, on or under plaster. Mounting does not require special tools, but compliance with electrical standards and regulations, especially when used as a protective conductor, is essential.
Operational Advantages
The cable offers high flexibility due to its fine-stranded copper conductor, which is beneficial when installing in confined spaces or with frequent bends. The PVC insulation ensures adequate electrical insulation, and flame retardancy according to VDE 0472 Part 804, Test Method B, enhances safety in case of fire. The green-yellow color coding facilitates identification as a protective conductor, improving maintenance and system safety. The cable is rated for an operating temperature up to +70 °C, enabling use in a wide range of environments.