Technical data
Design	Desktop or rack/wall mounting
PoE	PoE+
Packaging volume	0.0064m³
Transmission speed	10/100/1000Mb/s
Length packaging	0.270m
Type	Desktop switch
Height packaging	0.075m
Number of ports	8
Width packaging	0.315m
Weight	2.429kg
Managed
Fibre optics
Fans

The device is a powerful, high-performance Gigabit Ethernet Switch, with all 8 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for microsegmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps autosensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain. This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system.Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standard
Compliant with IEEE 802.3af/at PoE standard (DTE power via MDI)
Provides 8 PoE ports with classification identify, Supports 31.5W maximum per PoE port
Supports over current protection and circuit shorting protection
8 * RJ-45 ports for 1000BASE-TX and 100BASE-T and 10BASE-T connectivity
Supports MDI/MDI-X auto crossover
Supports 136W Max Full load: 31.5W(at) x 4P + 5W = 131W 15.4W(af) x 8P + 5W = 128.2W
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports extensive LED indicators for network diagnostics
Internal universal switching power supply
Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T, IEEE 802.3af/at PoE standard (DTE power via MDI), IEEE802.3x flow control
Interface 8 * 10/100/1000 Mbps auto MDI/MDI-X RJ-45 ports (Port 1~8 support PoE power feeding)
Network Data Rate 10/100/1000Mbps Auto-negotiation
Transmission Mode 10/100Mbps: Full-duplex, Half-duplex, 1000Mbps Full-duplex
LED Indications System: Power,Loop ,Ports: Link/ACT, PoE
Memory: 8K MAC address table, 9216 bytes jumbo packet length, 128K bytes buffer Memory
Operating Temperature 0° ~ 40°C, Operating Humidity 10% - 90% (non-condensing)
Power Supply 55V 2.73A 100-240V/47-63 Hz universal input
Included angle for 48,3 cm ( 19 inch ) systems
fanless