Technical data
Transmission rate	1Gb/s
Slot	PCI
Interface	Network
Height packaging	0.030m
Weight	0.119kg
Type	Network card
Length packaging	0.190m
Connections internal	None
Packaging volume	0.0008m³
Connections external	1x RJ45 socket
Width packaging	0.130m
Low Profile

The LCS-8037TXR5 is a high-performance Ethernet adapter for the 32-bit PCI bus architecture and the well-known Gigabit Ethernet technology. Ten times faster than a Fast Ethernet adapter, the 8037TXR5 brings the right speed to your current wired network. The LCS-8037TXR5 is ideal for upgrading your network to Gigabit, no more new expensive fibre optic cabling. Instead of expensive fibre optic cabling, the LCS-8037TXR5 can use existing copper cabling. You only need to install the new Gigabit adapters and switches without changing the existing CAT5 cabling. The LCS-8037TXR5 has built-in auto-negation so the adapter automatically adjusts to the highest possible network speed.Compliant with PCI V2.2; 2.1; 2.0, 32-bit, 33/66-MHz
Compliant with 10/100/1000 Mb/s full/half-duplex triple-speed operation
Complies with IEEE 802.3z, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab standards
Supports full duplex flow control (IEEE 802.3x)
Supports VLAN tagging (IEEE 802.1q)
IEEE 802.1p priority queuing for 4 classes of priority queues
Supports Crossover Detection & Auto-Correction
Wake-on-LAN and remote wake-up support
Supports jumbo frames up to 7Kbytes
Supports power-down/link-down and power-saving mode
8Kbits for transmit buffer, 64Kbits for receive buffer
Standard: IEEE 802.3, IEEE 802.3z; IEEE 802.3u; IEEE 802.1p; IEEE 802.3ab
Chipset: Realtek
Data rate: 1 * 10/100/1000 Mbps RJ-45; Supports Auto MDI/MDI-X.
Connectors: Supports Bus Master 32-bit PCI v2.2; 66 or 33 MHz bus speeds
LED: LNK/ACT: 10Mb/s; 100Mb/s; 1000Mb/s
Ambient temperature: 0° - 50°C (32°- 122° F)
Humidity: 10% ~ 90% (non-condensing)