| General |
| Mounting elements | 16 screw sets |
| Screw set reference | LF G M10 |
The article is a bend for cable tray systems of the brand Legrand, type VAN GEEL EFB45090300G. It is used for guiding and organizing electrical cables in installation systems, particularly in areas where a rounded transition structure between straight sections is required. The width of the bend is 450 mm, making it suitable for medium to large cable volumes. It is specifically designed for mounting with 16 screw sets available under reference number LF G M10. These fastening elements enable secure and durable anchoring of the bend to support structures or wall mountings.
Cable tray systems are used in electrical installations to guide cables and wiring in an organized and protective manner. The bend is an integrated component of such systems, enabling directional changes in cable routes without compromising mechanical integrity or electrical safety. It is commonly used in industrial, commercial, or municipal buildings where structured and accessible cable installation is necessary.
Functions and equipment in detail
The bend is designed for use in cable tray systems with a width of 450 mm. The shape ensures a smooth transition between straight sections, thereby reducing mechanical stress on the cables. These screw sets are intended for mounting on suitable substrates, with the exact mounting method depending on the specific installation situation. The use of the specified screw sets (LF G M10) ensures correct and stable fastening.
Technology explained simply
The construction of the bend is tailored to the loads encountered in electrical installations. The width of 450 mm allows for the parallel routing of multiple cables or wires, with the exact capacity depending on cable size and the number of wires to be installed. The curved shape is designed to ensure minimal bending radius stress on the cables, which extends the service life of the wiring. Material selection and shaping are aligned with requirements in industrial and commercial electrical installations.
Compatibility and accessories
The bend is specifically designed for cable tray systems with a width of 450 mm. It is compatible with other elements of the same system, such as straight sections, branch boxes, or end caps, provided these are also designed for a width of 450 mm. These screw sets are intended for mounting on suitable substrates, with the exact mounting method depending on the specific installation situation.
Mounting and installation
The bend is mounted by securing it to a load-bearing surface, such as a wall or support profile, using the 16 screw sets LF G M10. The positioning of the bend must allow for a smooth transition in the cable route and minimize mechanical stress on the cables. The fastening screws must be tightened securely but not over-tightened to avoid material fractures.
Advantages in operation
The use of the bend in cable tray systems enables structured and safe cable routing. The curved shape reduces mechanical stress on the cables, extending the service life of the wiring. The clear shaping facilitates installation and maintenance, as cables are easily accessible. The use of standardized fastening elements (LF G M10) ensures uniform and secure mounting, meeting the requirements of electrical installations. The width of 450 mm provides sufficient space for multiple cables, optimizing system capacity.