| Logistics data |
| Quantity per pack | 1 pc(s) |
The Cablofil heavy-duty grid tray CF 54/500 EZ from Legrand is a robust cable tray made of steel, designed for use in industrial and commercial installations. With a height of 54 mm, a width of 500 mm, and a delivery length of 3000 mm, it provides sufficient space for the installation of cables and wiring. The tray is electrolytically galvanized, ensuring high corrosion resistance, and features a safety edge that reduces the risk of injury during handling. The U-profile design ensures a stable structure and allows for easy mounting on walls or ceilings. The grid tray is supplied without an integrated connector, so additional connection pieces must be purchased separately.
Grid tray refers to the product type specifically developed for structured and secure routing of electrical cables and data lines. The
heavy-duty version features increased load capacity, making it suitable for applications with high cable volume or in environments with increased mechanical stress. The
electrolytic galvanization is carried out in accordance with standards NF A 91-102, DIN 50961, ISO 20.81 and 82, ensuring a uniform and dense protective layer. The
safety edge is an integrated design feature that caps the edges of the tray, minimizing the risk of cuts.
Applications include industrial production halls, commercial buildings, office complexes, and technical rooms where high mechanical load capacity and long service life of the cable tray are required. The tray is suitable for installing power and low-voltage wiring, including data and communication cables. The operating temperature range of −20 to 120 °C allows use in environments with significant temperature fluctuations, such as production facilities or outdoor areas.
Functions and equipment in detail include a grid structure with a mesh size of 50 x 100 mm, ensuring good air circulation and heat dissipation. The usable cross-section is 25,523 mm², allowing high capacity for installing multiple cables. The wire diameter of 5.9 mm ensures a stable construction. The tray is supplied without an integrated partition, so separate cable separation is not included in the delivery. The surface is zinc-colored, typical for galvanized steel structures.
Technology explained simply shows that electrolytic galvanization applies a zinc protective layer to the steel profile, protecting against oxidation and corrosion. The U-profile design provides high bending stiffness and prevents deformation under load. The safety edge is a patented feature that caps the tray edges, making handling safer. The grid structure allows good ventilation, which is particularly beneficial when installing cables with high heat generation potential.
Compatibility and accessories include use with other products from the Cablofil series, especially connectors and mounting elements. The grid tray is supplied without an integrated connector, so additional connection pieces must be purchased separately. The series is also available in other surface treatments such as hot-dip galvanized or stainless steel V2A and V4A; however, the version described here is specifically electrolytically galvanized. The standard EN 61537 is the underlying standard for the construction and use of cable trays in electrical installations.
Installation and mounting is typically done on walls or ceilings using appropriate mounting elements, which are not included in the delivery. The U-profile design enables easy and secure installation. The tray is available in a length of 3000 mm, allowing flexible planning of the installation. The weight specification of 3.4768 kg/m and a net weight of 10.42 kg for the full length must be considered when planning the mounting.
Operational advantages include high mechanical stability, long service life due to the corrosion protection layer, and safe handling thanks to the safety edge. The grid structure enables good heat dissipation and air circulation, which can extend the life of installed cables. Use in environments with high mechanical loads is possible due to the heavy-duty design. Compliance with standard EN 61537 ensures suitability for use in electrical installations according to applicable safety regulations.