| General |
| Manufacturer | Legrand |
| Product type | Analog time-switch |
| Motor | quartz motor |
| Gear accuracy | +/- 1 sec/day |
| Autonomy | 100 Std |
| Channels | 2 |
| Operating voltage | 230 V |
| Frequency | 50/60 Hz |
| Switching time | 1 to 60 Min |
| Shortest switching sequence | 30 Min |
| Switching output | 2 change-over contacts |
| Mounting | EN 60715 rail or surface mounting |
The Legrand PolaRex QKKT, type 49927, is an analogue time-switch with a quartz motor, designed for time-controlled operation of electrical loads in installations. The device features two channels and enables programming of switching operations via a daily disc, with short-term programs individually adjustable. The switching time is adjustable in steps from 1 to 60 minutes, with the shortest switching sequence – i.e. the interval between the start of two switching operations – being at least 30 minutes. The operating voltage is 230 V with a frequency of 50/60 Hz, enabling use in standardised electrical systems in Europe and other regions with corresponding mains voltage.
Applications
The time-switch is suitable for applications requiring daily, repetitive control of devices such as heating systems, lighting, ventilation systems or pumps. Due to its analogue control via a daily disc, it is particularly suitable for users requiring a visual overview of daily switching times. Installation is either on a support rail in accordance with EN 60715, commonly used in electrical switchboards, or surface-mounted on a wall or other suitable substrate. Dimensions of 113.7 mm (height) and 72 mm (width) fit standard installation rails and allow for a compact installation.
Functions and Equipment in Detail
The device operates with a quartz motor, ensuring a time accuracy of ±1 second per day. This high accuracy ensures that the programmed switching times remain stable over extended periods. The power reserve is 100 hours, meaning the clock continues to run and retains programmed settings even during mains power interruption. The daily disc enables visual programming of switching times, with switching operations triggered by mechanical scanning of the disc. The switching time can be set in increments from one minute up to 60 minutes, allowing flexible adaptation to different requirements.
Technology Explained Simply
The time-switch operates on the principle of mechanical scanning: the daily disc rotates via a quartz motor, and switching operations are triggered at specific positions as the disc passes a fixed point. The switching operations are carried out via two electrical changeover switches, each providing a switching contact for connection to the load. The changeover switches enable control of loads that need to be switched on or off, with each channel programmable independently. The quartz technology ensures high time accuracy, which is crucial for the reliability of switching operations.
Compatibility and Accessories
The time-switch is designed for use in electrical installations with an operating voltage of 230 V 50/60 Hz. Mounting on a support rail in accordance with EN 60715 allows integration into existing switchboards, while surface mounting enables flexible installation on walls or other surfaces. The switching outputs consist of two changeover switches, suitable for controlling loads with corresponding electrical load capacity.
Mounting and Installation
Mounting is either on a support rail in accordance with EN 60715, commonly used in electrical distributions, or surface-mounted. Dimensions of 113.7 mm height and 72 mm width allow for compact placement. Installation requires connecting the time-switch to the electrical supply (230 V) and connecting the load cables to the two changeover switches. Programming is done via the daily disc, with switching times set and verified visually.
Operational Advantages
The analogue control via a daily disc provides a clear, visual overview of daily switching times. The high time accuracy of the quartz motor ensures reliable and precise execution of programmed operations. The 100-hour power reserve ensures switching functionality remains intact even during short-term power outages. The use of two independent channels enables control of different loads with different switching profiles. The mounting options on support rail or surface-mounted increase installation flexibility in various environments.