| General |
| Operating voltage | 230 V |
| Frequency | 50/60 Hz |
| Gear accuracy | ±2,5 sec/day |
| Autonomy | 100 Std |
| Number of channels | 1 |
| Switching output | 1 change-over contact |
| Shortest switching time | 3 Std |
| Mounting method | front panel mounting, wall mounting |
| Motor type | quartz motor |
| Hand switch | ON/OFF/AUTOMATIC |
| Pointer adjustability | Forward and reverse |
The Legrand MicroRex QW, type 049756, is an analogue weekly timer for use in electrical installations. It is designed for time-controlled operation of consumers such as lighting, heating or ventilation via a single channel. The device is designed for front panel mounting and wall mounting, and operates with a supply voltage of 230 V at a frequency of 50/60 Hz. The switching function is performed by an integrated changeover switch, which turns the power supply to a connected device on or off according to the programming.
Applications
This timer is suitable for applications requiring a regular, weekly switching sequence, for example in residential buildings, office buildings or industrial facilities. It can be used for automated control of lighting systems, heating systems or ventilation devices to optimise energy consumption and plan operating times. The analogue display allows visual monitoring of the current time and the set switching times.
Functions and equipment in detail
The device features a quartz motor, ensuring a timekeeping accuracy of ±2.5 seconds per day. The timekeeping reserve is 100 hours, meaning the timer continues to run and retains the set times even during a power failure. A manual switch allows manual control with positions ON, OFF and AUTOMATIC, enabling flexible operation adjustment. The hands are rotatable both forwards and backwards, facilitating adaptation to changes such as daylight saving time or standard time. The shortest switching interval is 3 hours, allowing fine adjustment of the switching sequence.
Technology explained simply
The analogue weekly timer operates with a mechanical drive powered by the quartz motor. Time is displayed via a dial indicator, showing the current time and the set switching times. The switching function is performed by an electrical changeover switch, which opens or closes the circuit according to the programming. The supply voltage of 230 V is provided via the mains network, so no additional power supply is required. The quartz technology ensures high time accuracy, which is essential for reliable switching performance.
Compatibility and accessories
The timer is suitable for mounting in front panels and for wall mounting. It is equipped with a 1-channel changeover switch designed for controlling a single consumer. Compatibility with other devices is ensured as long as the electrical requirements (voltage, current) are met.
Installation and mounting
Mounting is either into a front panel or onto a wall. The installation conditions are standardised, so the timer fits into typical installation ducts or boxes. Electrical connections are made via the designated terminal clamps, designed for a supply voltage of 230 V. Programming of switching times is done by rotating the hands, with the shortest switching interval being 3 hours. Adjustment for daylight saving time or standard time is easily possible thanks to the rotatable hands.
Advantages in operation
The analogue weekly timer offers reliable and low-maintenance control of consumers. The high timekeeping accuracy of the quartz motor ensures precise time control, while the 100-hour timekeeping reserve secures functionality even during short-term power failures. Manual control via the hand switch enables flexible use, and the rotatable hands simplify adjustment to seasonal time changes. The switching function via a changeover switch is universally applicable and compatible with a wide range of electrical devices.