Lapp 7027055/50, EAN: 4044774686585

Lapp 7027055/50 ÖLFLEX TRUCK 170 TWIN 2x6 50m

Cables > Control line > Flexible Control lines

Lapp 7027055/50 ÖLFLEX TRUCK 170 TWIN 2x6 50m

Lieske Part No. 459827
Mfg Part No 7027055/50
EAN-Code 4044774686585
Manufacturer Lapp
Here only 300,21 EUR
357,25 EUR incl. VAT

Further information for Lapp 7027055/50 ÖLFLEX TRUCK 170 TWIN 2x6 50m

General
Cable typevehicle wiring
Installation methodFixed installation
Application areacommercial vehicles
Wire identificationColours
Operating voltage60 V
Number of conductors2
Core cross section6 mm²
Insulating materialPVC
ADR approvalYes
The vehicle cable ÖLFLEX® TRUCK 170 TWIN 2x6/TÜ.EGG.091-04 from Lapp is a flexible control cable, specifically designed for use in commercial vehicles. It serves as a battery cable between the power source and the end consumer and is intended for fixed installation. The cable features a special ADR approval, enabling its use in the field of road transport of dangerous goods according to the requirements of ADR (Accord européen relatif au transport des marchandises dangereuses par route). The construction ensures safe and reliable power supply in mobile applications, particularly in vehicles subjected to high mechanical and thermal stresses.

Applications

The cable is primarily intended for use in commercial vehicles, especially as a battery cable. It is suitable for fixed installation within the vehicle, where high mechanical load capacity and resistance to environmental influences are required. The ADR approval makes it particularly suitable for vehicles transporting hazardous goods, as specific requirements apply to the electrical equipment in such cases. The cable is designed for operating voltages up to 60 V, which is typical for 12 V and 24 V systems in vehicles.

Functions and Features in Detail

A key advantage of the ÖLFLEX® TRUCK 170 TWIN 2x6/TÜ.EGG.091-04 is polarity recognition even before stripping. The printed article designation is always located on the positive conductor, preventing incorrect connections. This increases safety during installation and reduces error sources. Additionally, the special strand construction prevents the occurrence of a brush effect (flaring) after stripping, significantly simplifying handling during crimping or contacting. Conductor identification is done by color, enabling quick and unambiguous assignment.

Technology Explained Simply

The cable consists of two conductors, each with a cross-section of 6 mm², bundled together in a common PVC jacket. The PVC jacket provides protection against mechanical stress, moisture, and chemical influences. The operating voltage is rated at 60 V, which is sufficient for most vehicle applications. The ADR approval ensures compliance with European regulations for the road transport of dangerous goods. The cable is designed for fixed installation, meaning it is not intended for movable or flexibly loaded applications.

Compatibility and Accessories

The cable is specifically developed for use in commercial vehicles and can be connected using standard connection techniques such as cable lugs, plug connectors, or terminals. The ADR approval requires specific compliance, which should be considered when selecting accessories and connection elements.

Installation and Mounting

Installation is carried out by fixed routing within the vehicle. The cable is designed for mechanically stressed environments, but not for movable applications. Stripping is straightforward, as the flaring of strands (brush effect) is avoided. Polarity recognition via the print on the positive conductor facilitates correct connection. Crimping or contacting can be performed using standard tools and connection techniques.

Operational Advantages

The cable offers high reliability and safety in operation, particularly through the prevention of incorrect connections and easy handling during processing. The ADR approval enables use in vehicles transporting hazardous goods, which is an important prerequisite for applications in logistics and transport. The PVC insulation provides sufficient protection against environmental influences, and the fixed installation ensures long service life under load.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/459827
qrcode für Lapp 7027055/50 ÖLFLEX TRUCK 170 TWIN 2x6 50m