| General |
| Cable type | single-core cable |
| Cable designation | LIYCY |
| Number of conductors | 1 |
| Cross section | 2,5 mm² |
| Degree of protection | shielded |
| Screening | Copper shield braid |
| Insulating material | PVC |
| Installation method | Fixed installation |
| Application environment | dry and damp rooms |
| Resistance | Resistant to acids and alkalis |
| Oil resistance | conditional |
The single-core cable LIYCY 1X2.5 from Lapp is a shielded control cable for fixed installation, specifically developed for applications with high requirements for electromagnetic compatibility (EMC). The product is available in a length of 100 meters and is suitable for wiring within enclosures as well as for machine internal circuits. The PVC outer sheath provides protection in dry and damp rooms and is resistant to acids and alkalis, with conditional oil resistance. The cable is intended for fixed and protected installation and is typically used in industrial and technical installations.
Applications
LIYCY 1X2.5 is designed for use in dry and damp indoor environments and can also be used in environments with increased electromagnetic interference. It is particularly suitable for internal enclosure wiring and connecting components within machines. The fixed installation makes it a reliable solution for permanent installations where high mechanical stability and long-term durability are required.
Features and Equipment in Detail
A central feature of the cable is the copper shielding braid with high coverage, providing effective protection against electromagnetic interference. This is especially important in environments where electrical devices or controls are sensitive to interference. The single-core cable features a PVC insulating and outer sheath, protecting the cable against external influences such as moisture, acids, and alkalis. The conditional oil resistance extends the application range to industrial environments where minor oil contamination may occur.
Technology Explained Simply
The designation LIYCY refers to a cable with a PVC insulating and outer sheath, equipped with a copper shielding braid. The specification 1X2.5 indicates that it is a single-core cable with a cross-section of 2.5 mm². The copper shielding braid ensures that electromagnetic interference from other electrical devices does not impair signal transmission. This is particularly important in control and switching systems, where clear signal transmission is critical. The PVC sheathing ensures high mechanical strength and chemical resistance.
Compatibility and Accessories
The cable is designed for use in enclosures and machine-proximate installations. It can be combined with other components from the Lapp product line, especially in systems with high EMC requirements. Wiring is typically done with standard terminals and connectors designed for 2.5 mm² conductors.
Installation and Mounting
Installation is carried out by fixed routing, with the cable being installed in enclosures, machines, or other protected environments. The PVC sheathing allows for easy handling, as it is easy to route and connect. The cable is not intended for movable applications, but for permanent, fixed installations. Mounting does not require special tools, although electrical regulations and safety guidelines must be observed.
Operational Advantages
The use of LIYCY 1X2.5 provides reliable protection against electromagnetic interference, enhancing signal quality in control and switching systems. The chemical resistance of the PVC sheath ensures a long service life, even in demanding environments. The fixed installation ensures mechanical stability, which is required for industrial applications. The cable is thus a robust and high-performance solution for applications where EMC requirements and mechanical loads are relevant.