| General |
| Conductor cross section | 70 mm² |
| Core insulation colour | Red |
| Operating voltage | 450/750 V |
| Insulating material | PVC |
| Certification | HAR |
| Installation method | Fixed installation |
| Minimum operating temperature | -40 °C |
| Cable type | H07V-K |
| Application | Internal machine circuits, lighting wiring, equipotential bonding |
The single-core cable H07V-K 1X70 RD from Lapp is a fixed installation cable with a conductor cross-section of 70 mm² and red-coloured core insulation. It is designed for use in industrial and machine-proximate applications, particularly for wiring internal machine circuits as well as for fixed and protected installation. The cable is also suitable for lighting wiring and can be used on cable trays for open installation for equipotential bonding. It is used in installations requiring high mechanical and thermal load capacity, and can be operated down to a temperature of -40 °C.
Applications
This cable is intended for fixed installations in indoor environments and protected outdoor areas. It is commonly used in industrial electrical installations, machine and plant construction, and lighting technology. Installation on cable trays allows for structured and clear cable routing, particularly in production plants or manufacturing technology. Its high mechanical strength and resistance to environmental influences make it a reliable solution for permanent installations.
Functions and Equipment in Detail
The single-core cable is made from a solid copper conductor and is sheathed with a PVC insulation layer. The red colour serves for clear identification within the electrical system, with various core insulation colours available. The cable is HAR-certified, confirming its tested safety and quality according to the harmonised European standard H07V-K. This certification does not apply to transparent, green, or yellow single colours, nor to dual colours, except for green/yellow and yellow/green. The cable is designed for an operating voltage of U0/U: 450/750 V, making it suitable for a wide range of low-voltage applications.
Technology Explained Simply
The designation H07V-K describes a harmonised cable according to European standards, where H stands for harmonised, 07 for voltage class (450/“750 V), and V-K for PVC insulation. The cable is designed for fixed installation, meaning it must not be moved or bent after installation. The PVC insulation provides high protection against mechanical damage, moisture, and chemical influences. The HAR certification guarantees that the cable meets the requirements of the European standard and is widely accepted within the EU.
Compatibility and Accessories
The cable is designed for use in electrical installations requiring fixed installation. It can be combined with other cables of type H07V-K, especially in multi-core installations. The availability of bulk cartons is dependent on colour and cross-section and is generally only available up to a conductor cross-section of 6 mm². The cable is available in various core insulation colours, enabling flexible adaptation to existing systems.
Installation and Mounting
Mounting is carried out by fixed installation, where the cable must not be moved. Installation takes place in protected areas, and the cable can be routed on cable trays or within cable ducts. Connections are made using suitable terminals or screw connections, taking into account the mechanical strength of the conductor. The cable is not suitable for movable applications.
Operational Advantages
The cable offers high mechanical strength and resistance to environmental influences. The HAR certification ensures tested quality recognised within the EU. Availability in various colours enables clear identification within the electrical system. The cable is designed for long service life and is suitable for permanent installations in industrial and machine-proximate applications. The operating temperature down to -40 °C extends its application range in climatically demanding environments.
The cable is available in lengths depending on order volume. The exact length is specified during the ordering process. Use is exclusively for fixed installation; the cable is not suitable for movable applications. The cable is not intended for use in explosive atmospheres. Fire behaviour classification is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification available on the LAPP website by article number.