Lapp 4521017, EAN: 4044773421545

Lapp 4521017 H07V-K 1X150 BK cable black

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

Lapp 4521017 H07V-K 1X150 BK cable black

Lieske Part No. 460395
Mfg Part No 4521017
EAN-Code 4044773421545
Manufacturer Lapp
Here only 31,02 EUR
36,91 EUR incl. VAT

Further information for Lapp 4521017 H07V-K 1X150 BK cable black

General
Conductor cross section150 mm²
ColourBlack
Operating voltage450/750 V
Insulating materialPVC
ApprovalHAR-certified
Working temperature-40 °C
ConstructionH07V-K
Installation methodFixed installation
Applicationwiring of machine internal circuits, wiring of luminaires, equipotential bonding
Availabilitylength-dependent
Test mark¿HAR¿
Flame retardancyin accordance with EU Directive 305/2011 (BauPVO/CPR)
The single-core cable H07V-K 1X150 BK from Lapp is a fixed wiring cable designed for use in industrial and machine engineering applications. It features a conductor cross-section of 150 mm² and is available in black. The cable is designed for fixed and protected installation and is particularly suitable for wiring internal machine circuits as well as for powering lighting fixtures. Due to its construction, it is also suitable for open installation on cable trays, for example, for implementing equipotential bonding conductors. The cable is manufactured according to the harmonized European design H07V-K and carries the test mark ¿HAR¿, which stands for tested safety and quality. However, this test mark does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The cable is designed for operating temperatures up to -40 °C, making it suitable for use in colder environments.

Single-core cable is the product type, which here is executed as a single, insulated conductor. This design allows for flexible use in various wiring situations, especially when separate installation of individual cores is required. The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for use in low-voltage installations. The insulation consists of PVC, a robust and widely used plastic known for its electrical insulation properties and mechanical durability. The cable is HAR-certified, meaning it meets the requirements of harmonized European standards and is widely accepted throughout the EU.

Fixed installation is the intended application, where the cable is not moved or frequently reinstalled, but permanently installed in one position. This includes, for example, installation in machines, plants, or in building electrotechnics. The use on cable trays for open installation is explicitly mentioned, particularly for equipotential bonding, indicating an application in electrical installation and safety technology.

H07V-K is the harmonized European design, which defines the technical specifications of the cable. This design includes, among other things, the voltage class, insulating materials, and mechanical properties. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with the exact fire behavior determinable via the article number selection on the LAPP website. This allows for targeted selection of the cable depending on the fire protection requirements of the specific application site.

PVC insulation provides good electrical insulation and mechanical stability. The insulation is solid and resistant to mechanical stress, ensuring durable and safe installation. The color black is standard, with various core insulation colors available in the range, although not all cross-sections and colors are available in bulk cartons. The availability of bulk cartons is color- and cross-section-dependent and generally only available up to a conductor cross-section of 6 mm². The cable is available in various lengths, allowing flexible adaptation to specific requirements.

The cable is suitable for wiring lighting fixtures, indicating an application in lighting technology. Its use in internal machine circuits demonstrates its suitability for industrial applications where reliable and safe power supply is required. The operating temperature up to -40 °C extends its application range to colder regions or in air conditioning and cooling rooms. The cable is not intended for movable installations or for outdoor use without additional protection, as no specific protection rating such as IP67 is mentioned.

HAR-certified means that the cable meets the requirements of harmonized European standards and is recognized throughout the EU. This ensures high quality and safety, which is crucial for use in industrial and commercial installations. The approval according to EU Directive 305/2011 (BauPVO/CPR) enables transparent and traceable selection of the cable depending on fire protection requirements.

The cable is available in various core insulation colors, with the availability of bulk cartons being color- and cross-section-dependent. The note that bulk cartons are generally only available up to a 6 mm² conductor cross-section means that no bulk carton packaging is offered for the 150 mm² cross-section. The cable is available in various lengths, allowing flexible adaptation to specific requirements. The use in building electrotechnics, especially for equipotential bonding conductors, is explicitly mentioned, indicating an application in electrical installation.

Wiring of lighting fixtures and internal machine circuits are the central application areas. The cable is designed for fixed installation and is suitable for applications requiring permanent and safe power supply. The use on cable trays indicates its suitability for open installations in industrial environments. The cable is not intended for movable installations or for outdoor use without additional protection, as no specific protection rating such as IP67 is mentioned.

The cable is manufactured according to the harmonized European design H07V-K and carries the test mark ¿HAR¿, which stands for tested safety and quality. However, this test mark does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with the exact fire behavior determinable via the article number selection on the LAPP website. This allows for targeted selection of the cable depending on the fire protection requirements of the specific application site.

Operation up to -40 °C indicates the thermal load capacity of the cable. This is particularly relevant for applications in colder environments, such as in cooling plants, cooling rooms, or in regions with extreme temperatures. The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for use in low-voltage installations. The insulation consists of PVC, a robust and widely used plastic known for its electrical insulation properties and mechanical durability.

The cable is designed for fixed and protected installation, meaning it is not intended for movable applications or for outdoor use without additional protection. The use on cable trays for open installation is explicitly mentioned, particularly for equipotential bonding, indicating an application in electrical installation and safety technology. The cable is available in black, with various core insulation colors available in the range, although not all cross-sections and colors are available in bulk cartons.

Available in various lengths means the cable can be ordered in different lengths, allowing flexible adaptation to specific requirements. The availability of bulk cartons is color- and cross-section-dependent and generally only available up to a conductor cross-section of 6 mm². Therefore, no bulk carton packaging is available for the 150 mm² cross-section. The cable is suitable for wiring lighting fixtures and internal machine circuits, emphasizing its suitability for industrial and commercial applications.

The cable is manufactured according to the harmonized European design H07V-K and carries the test mark ¿HAR¿, which stands for tested safety and quality. However, this test mark does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with the exact fire behavior determinable via the article number selection on the LAPP website. This allows for targeted selection of the cable depending on the fire protection requirements of the specific application site.

HAR-certified means that the cable meets the requirements of harmonized European standards and is recognized throughout the EU. This ensures high quality and safety, which is crucial for use in industrial and commercial installations. The approval according to EU Directive 305/2011 (BauPVO/CPR) enables transparent and traceable selection of the cable depending on fire protection requirements.

The cable is available in various core insulation colors, with the availability of bulk cartons being color- and cross-section-dependent. The note that bulk cartons are generally only available up to a 6 mm² conductor cross-section means that no bulk carton packaging is offered for the 150 mm² cross-section. The cable is available in various lengths, allowing flexible adaptation to specific requirements. The use in building electrotechnics, especially for equipotential bonding conductors, is explicitly mentioned, indicating an application in electrical installation.

Wiring of lighting fixtures and internal machine circuits are the central application areas. The cable is designed for fixed installation and is suitable for applications requiring permanent and safe power supply. The use on cable trays indicates its suitability for open installations in industrial environments. The cable is not intended for movable installations or for outdoor use without additional protection, as no specific protection rating such as IP67 is mentioned.

The cable is manufactured according to the harmonized European design H07V-K and carries the test mark ¿HAR¿, which stands for tested safety and quality. However, this test mark does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with the exact fire behavior determinable via the article number selection on the LAPP website. This allows for targeted selection of the cable depending on the fire protection requirements of the specific application site.

Operation up to -40 °C indicates the thermal load capacity of the cable. This is particularly relevant for applications in colder environments, such as in cooling plants, cooling rooms, or in regions with extreme temperatures. The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for use in low-voltage installations. The insulation consists of PVC, a robust and widely used plastic known for its electrical insulation properties and mechanical durability.

The cable is designed for fixed and protected installation, meaning it is not intended for movable applications or for outdoor use without additional protection. The use on cable trays for open installation is explicitly mentioned, particularly for equipotential bonding, indicating an application in electrical installation and safety technology. The cable is available in black, with various core insulation colors available in the range, although not all cross-sections and colors are available in bulk cartons.

Available in various lengths means the cable can be ordered in different lengths, allowing flexible adaptation to specific requirements. The availability of bulk cartons is color- and cross-section-dependent and generally only available up to a conductor cross-section of 6 mm². Therefore, no bulk carton packaging is available for the 150 mm² cross-section. The cable is suitable for wiring lighting fixtures and internal machine circuits, emphasizing its suitability for industrial and commercial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/460395
qrcode für Lapp 4521017 H07V-K 1X150 BK cable black