| General |
| Core insulation colour | Green-yellow |
| Nominal voltage | 450/750 V |
| Insulating material | PVC |
| Certification | HAR |
| Working temperature | -40 °C |
| Cable type | H07V-K |
| Installation method | Fixed installation |
| Application | Equipotential bonding, machine wiring, lighting wiring |
The single core cable H07V-K/25,0/GNYE from Lapp is a fixed installation cable with a conductor cross-section of 25.0 mm² and green-yellow core insulation. It is designed for use in industrial and machine engineering applications, particularly for equipotential bonding and wiring of internal machine circuits. The cable is supplied in a length of 100 metres and is suitable for fixed and protected installations, for example on cable trays for open routing. The green-yellow colouring corresponds to the standard for protective conductors (PE) and is used in electrical installations for earthing.
Applications
The cable is intended for use in electrical installations indoors, particularly in the machine and plant construction industry. It is suitable for wiring lighting fixtures and for fixed installation in protected environments. The operating temperature can be as low as -40 °C, enabling use in climatically demanding environments. The cable is not intended for movable connections or flexible applications.
Functions and Features in Detail
The single core cable is made from a solid copper conductor and is surrounded by a PVC insulation sheath. The insulation is green-yellow in colour, enabling clear identification as a protective conductor. The cable is HAR-certified, guaranteeing tested safety and quality according to the harmonised European type H07V-K. However, the HAR test mark is not valid for transparent, single-colour green or yellow core insulations, nor for dual colours (except green-yellow and yellow-green).
Technology Explained Simply
The designation H07V-K describes a harmonised cable according to European standards. The letter “H” stands for harmonised, “07” for the nominal voltage class U0/U: 450/750 V, “V” for PVC insulation, and “K” for a solid copper conductor. The cable is therefore designed for an operating voltage of up to 750 V (between conductor and earth) and 450 V (between conductors). The PVC insulation provides good mechanical and electrical protection and is suitable for fixed installations. The green-yellow colouring is internationally standardised for protective conductors and supports compliance with safety regulations.
Compatibility and Accessories
The cable is designed for use in electrical installations executed according to current safety and fire protection standards. The fire behaviour classification is carried out in accordance with EU Directive 305/2011 (BauPVO/CPR), with the exact classification being determined via the article number selection on the LAPP website. The cable is available in various core insulation colours, with the green-yellow version specifically intended for protective conductors. The availability of bulk cartons is dependent on colour and cross-section and is generally only available up to a conductor cross-section of 6 mm².
Installation and Mounting
The cable is intended for fixed installations and must be installed in accordance with current regulations for electrical installations. Mounting takes place in protected environments, for example in machine enclosures, enclosures or on cable trays. The green-yellow colouring facilitates correct identification as a protective conductor. The cable is not suitable for movable or flexibly loaded applications.
Operational Advantages
The HAR certification ensures high quality and safety of the cable. The green-yellow colouring supports clear identification and compliance with safety regulations. The cable is suitable for use at temperatures down to -40 °C, enabling broad applicability in climatically demanding environments. The PVC insulation provides good mechanical and electrical protection and is designed for fixed installations.