| General |
| Conductor cross section | 4 mm² |
| Core insulation colour | dark blue |
| Installation method | Fixed |
| Operating voltage | 450/750 V |
| Insulating material | PVC |
| Certification | HAR |
| Working temperature | -40 °C |
| Construction | H07V-K |
| Packaging form | Ring |
The single-core cable H07V-K 1X4 DBU from Lapp is a fixed installation cable with a conductor cross-section of 4 mm² and dark blue core insulation. It is supplied in a length of 100 metres as a coil and is intended for fixed and protected installation in industrial and machine engineering applications. The cable complies with the harmonised European type H07V-K and is certified with the test mark ¿HAR¿, guaranteeing tested safety and quality for use in Europe. However, the approval does not apply to transparent, green or yellow single colours, nor to dual colours, except green/yellow and yellow/green.
Applications
The cable is suitable for wiring internal machine circuits as well as for connecting luminaires. It can also be used on cable trays for open installation, particularly for equipotential bonding. The operating temperature ranges up to -40 °C, enabling use in climatically demanding environments. Installation takes place in protected areas, and the cable is designed for fixed installations.
Functions and Equipment in Detail
The single-core cable features PVC insulation, providing high mechanical and chemical resistance. The insulation is dark blue, enabling easy identification within the wiring system. The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for a wide range of industrial applications. The HAR certification ensures compliance with European safety and quality standards.
Technology Explained Simply
The designation H07V-K describes a harmonised cable according to European standards, where “H” stands for harmonised, “07” for voltage class 45ron/750 V, “V” for PVC insulation, and “K” for fixed installation. Thus, the cable is designed for use in permanently installed systems that are not moved. The dark blue colour serves as identification and simplifies wiring planning. The PVC insulation provides protection against mechanical stress and moisture.
Compatibility and Accessories
The cable is designed for use in electrical installations installed according to applicable standards. Use in conjunction with other cables or wires follows the technical specifications of the respective application. Various core insulation colours are available, and selection should be aligned with the specific application and marking regulations. Availability in large cartons is dependent on colour and cross-section and generally limited to conductor cross-sections up to 6 mm².
Installation and Mounting
The cable is intended for fixed installation and must not be moved or bent without compromising its mechanical properties. Installation takes place in protected areas, with ambient conditions not falling below the operating temperature of -40 °C. Wiring is carried out in accordance with applicable regulations for electrical installations, and the cable is suitable for equipotential bonding and connecting luminaires.
Operational Advantages
The H07V-K cable offers high reliability and safety through HAR certification. The PVC insulation ensures long service life and resistance to environmental influences. The dark blue colour facilitates identification and maintenance within the system. Use in industrial plants and machines ensures stable power supply and secure connections.
The cable is classified in accordance with EU Directive 305/2011 (BauPVO/CPR), with the exact fire behaviour class determinable via the article number selection on the LAPP website. Approval and marking are carried out in accordance with applicable European standards, enabling use in various countries. The cable is widely accepted and usable in Europe, with specific application requirements to be considered.