Lapp 4520015/100, EAN: 4044774701776

Lapp 4520015/100 H07V-K10SW Cable 1x10 black

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

Lapp 4520015/100 H07V-K10SW Cable 1x10 black

Lieske Part No. 886095
Mfg Part No 4520015/100
EAN-Code 4044774701776
Manufacturer Lapp
Here only 213,56 EUR
254,14 EUR incl. VAT

Further information for Lapp 4520015/100 H07V-K10SW Cable 1x10 black

General
Conductor cross section10 mm²
Operating voltage450/750 V
Insulating materialPVC
ColourBlack
Degree of protectionFixed installation
CertificationHAR
Operating temperature-40 °C
Cable typeSingle wire
ConstructionH07V-K
Packagingsingle-use large carton
Flame retardancyin accordance with EU Directive 305/2011 (BauPVO/CPR)
The single-core cable H07V-K 1X10 BK 100 M from Lapp is a fixed installation cable with a conductor cross-section of 10 mm², designed for use in industrial and machine-proximate applications. The cable is supplied in a length of 100 meters and is black in color. It conforms to the harmonized European type H07V-K and is marked with the test mark ¿HAR¿, which certifies tested safety and quality. This test mark does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The cable is intended for fixed and protected installations and is suitable for example for wiring internal machine circuits or for powering luminaires. On cable trays, it can also be used for open installation for equipotential bonding. The operating temperature can be as low as -40 °C, making it suitable for applications in colder environments.

Applications

The cable is intended for use in industrial environments as well as in machine and plant engineering. It is frequently used for wiring electrical circuits within machines, where a fixed and permanent installation is required. It is also suitable for lighting installations, particularly for powering luminaires. Installation on cable trays allows for an open and accessible setup, which is advantageous for maintenance and inspection. The cable is suitable for equipotential bonding, which is important in electrical installations to ensure uniform potential.

Functions and Equipment in Detail

The single-core cable features PVC insulation, providing high mechanical and chemical resistance. The insulation is black, which allows for good visibility and differentiation in complex wiring. The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for a wide range of low-voltage applications. The use of PVC as insulating material ensures good electrical insulation and resistance against moisture and mechanical stress. The cable is available in a single-use large carton, with availability of large cartons being color- and cross-section-dependent and generally offered only up to a conductor cross-section of 6 mm².

Technology Explained Simply

The designation H07V-K describes a harmonized European type that defines specific requirements for the electrical and mechanical properties of the cable. The letter “H” stands for harmonized, “07” for the voltage class (450/750 V), “V” for PVC insulation, and “K” for fixed installation. The cable is designed for permanent, non-moving installation, with limited mechanical stress. The PVC insulation offers high resistance against moisture, mechanical stress, and chemical influences. The temperature resistance up to -40 °C allows use in climatically demanding environments, such as outdoor installations or cooling systems.

Compatibility and Accessories

The cable is available in various conductor insulation colors, with black specified here. The use of color-coded conductors facilitates identification and wiring in complex electrical systems. The cable is suitable for use in combination with other components in electrical and machine engineering, especially in systems requiring fixed installation. Use in conjunction with cable trays or in protected installation conditions is recommended to ensure the service life and safety of the installation.

Installation and Mounting

Installation is carried out by fixed mounting, where the cable should not be moved or bent to maintain mechanical integrity. Installation on cable trays is a common method to keep the cable accessible and neatly arranged. Wiring for luminaires or internal machine circuits requires careful planning and securing to ensure a safe and durable connection. The cable is designed for use in protected environments, with open installation only recommended if environmental conditions meet the cable’s requirements.

Operational Advantages

The cable offers high reliability and safety through HAR certification, which guarantees tested quality and safety. The PVC insulation ensures long service life and resistance against environmental influences. Availability in large cartons facilitates procurement for larger projects, with flexible selection of color and cross-section. The operating temperature down to -40 °C extends the application range to colder regions or special industrial plants. The cable is widely accepted and usable in Europe, simplifying planning and procurement for international projects. Classification of fire behavior according to EU Directive 305/2011 (BauPVO/CPR) enables transparent selection of the correct cable for the respective application, with exact article number selection available on the LAPP website.

Protection Rating

The cable is designed for fixed and protected installations, with no specific protection rating (e.g., IP value) specified. Installation occurs in protected environments, where the PVC insulation provides sufficient protection against moisture and mechanical influences. Use in open areas, such as on cable trays, is possible, but only if environmental conditions meet the cable’s requirements.

HAR Certification

The HAR certification (Harmonised Approval for Rubber and Plastics) is a test mark confirming the safety and quality of the cable. It applies to the cable described here, but not to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green. The certification is widely used in Europe and accepted in many application areas.

Fire Behavior

The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification determined via article number selection on the LAPP website. This classification enables transparent selection of the cable regarding fire behavior, which is important for planning electrical installations.

Availability

The cable is available in a single-use large carton, with availability of large cartons being color- and cross-section-dependent and generally offered only up to a conductor cross-section of 6 mm². The color black is specified here, with other colors possibly available depending on the offer.

Operating Temperature

The cable can be used at temperatures down to -40 °C, making it suitable for applications in colder environments.

Material

The insulation consists of PVC (polyvinyl chloride), which offers high electrical insulation, mechanical strength, and resistance against moisture and chemical influences. The material is suitable for permanent installation and is commonly used in industry.

Voltage Class

The cable is rated for an operating voltage of U0/U: 450/750 V, making it suitable for a wide range of low-voltage applications. The voltage class corresponds to the harmonized type H07V-K and is intended for fixed installations.

Installation

Installation is carried out fixed and protected, with the cable not to be moved or bent. Installation on cable trays is a common method to keep the cable accessible and neatly arranged. Use in protected environments is recommended to ensure the service life and safety of the installation.

Accessories

Use in conjunction with cable trays or other mounting elements is common to ensure secure installation.

Cable Type

The cable is a single-core cable, meaning it consists of a single conductor insulated with PVC. The designation H07V-K describes the harmonized European type, which defines specific requirements for electrical and mechanical properties.

Conductor Cross-Section

The conductor cross-section is 10 mm², providing high current-carrying capacity and low resistive heating. The cross-section is suitable for applications in machine and plant engineering, where high electrical power must be transmitted.

Color

The cable is black, which allows for good visibility and differentiation in complex wiring. The color black is specified here, with other colors possibly available depending on the offer.

Length

The cable is supplied in a length of 100 meters, with length being length-dependent. Packaging is in a single-use large carton, with availability of large cartons being color- and cross-section-dependent and generally offered only up to a conductor cross-section of 6 mm².

Certification

The cable is marked with the test mark ¿HAR¿, which certifies tested safety and quality. The certification is widely used in Europe and accepted in many application areas. The certification does not apply to transparent, green, or yellow single colors, nor to dual colors, except for green/yellow and yellow/green.

Application

The cable is suitable for use in industrial environments, machine and plant engineering, as well as in lighting installations. It is frequently used for wiring electrical circuits within machines, where a fixed and permanent installation is required. Installation on cable trays allows for an open and accessible setup, which is advantageous for maintenance and inspection. The cable is suitable for equipotential bonding, which is important in electrical installations to ensure uniform potential.

Safety

The HAR certification ensures tested safety and quality of the cable. The PVC insulation offers high resistance against moisture, mechanical stress, and chemical influences. Installation in protected environments and use in conjunction with cable trays increase the safety of the installation.

Durability

The cable is designed for permanent, fixed installation, with the PVC insulation providing long service life and resistance against environmental influences. Installation in protected environments and use in conjunction with cable trays increase the durability of the installation.

Flexibility

The cable is designed for fixed installation and should not be moved or bent. Flexibility is limited, as the cable is designed for permanent, non-moving installation.

Costs

Procurement is via the B2B webshop, with prices varying depending on order quantity and delivery conditions.

Scope of Delivery

The cable is supplied in a length of 100 meters, with packaging in a single-use large carton.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/886095
qrcode für Lapp 4520015/100 H07V-K10SW Cable 1x10 black