| General |
| Cable type | H05V-K |
| Number of conductors | 1 |
| Cross section | 1 mm² |
| Insulation colour | Red |
| Installation method | Fixed |
| Voltage class | 300/500 V |
| Insulating material | PVC |
| Certification | HAR |
| Temperature range | -40 °C |
| Flame retardancy | in accordance with EU Directive 305/2011 (BauPVO/CPR) |
The single core cable H05V-K/RD/1,0 from Lapp is a fixed installation cable with a cross-section of 1 mm², insulated in red, and supplied in a length of 100 metres as a coil. It is designed for use in machine internal circuits, for wiring of lighting fixtures, and for equipotential bonding on cable trays. The cable conforms to the harmonised European type H05V-K and carries the HAR mark, which stands for tested safety and quality. It is intended for fixed and protected installation and can be used at temperatures down to -40 °C.
Applications
The cable is suitable for wiring in industrial and machine engineering applications, particularly in environments where fixed installation and mechanical stability are required. It is suitable for use indoors and in protected outdoor areas, provided the installation is shielded from direct weather exposure. Use on cable trays for open installation is possible, especially for equipotential bonding. The cable is also intended for wiring of lighting installations.
Functions and Equipment in Detail
The single core cable features PVC insulation, providing high mechanical strength and chemical resistance. The insulation is red, enabling easy identification within the wiring system. Various core insulation colours are available, allowing flexible use in different system configurations. The cable is HAR-certified, ensuring high safety and quality standards in accordance with European norms.
Technology Explained Simply
The designation H05V-K describes a harmonised cable according to European standards. The marking 1X1 indicates a single core with a cross-section of 1 mm². The voltage class U0/U: 300/500 V indicates that the cable is rated for an operating voltage up to 500 V (between conductor and earth) and 300 V (between conductors). The PVC insulation provides good electrical insulation and mechanical strength. The HAR certification (HAR = Harmonised Approval for Rubber) confirms that the cable meets the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding fire behaviour.
Compatibility and Accessories
The cable is designed for use in conjunction with other H05V-K cables and in electrical installations requiring fixed installation. It can be installed together with other cables of the same type in a cable duct or on cable trays. Use in single-use large cartons is possible, facilitating storage and handling in larger quantities.
Installation and Mounting
The cable is intended for fixed installation and must be installed in accordance with electrical engineering regulations. Installation takes place in protected areas, taking into account mechanical stress and environmental conditions. The cable must not be installed in areas exposed to direct weather conditions unless protected by an additional protective sleeve or cable duct. Mounting does not require special tools, but proper connections at the ends must be ensured.
Operational Advantages
The cable offers high reliability for power transmission and is suitable for use in industrial installations. The PVC insulation ensures long service life and resistance to mechanical stress. The HAR certification guarantees consistent quality and safety, widely recognised in Europe. The availability in various core colours enables clear identification and facilitates maintenance and fault diagnosis during operation.