Further information for Lapp 27900312 HITRONIC HQW3000 12G 50/125 OM3 armored
Certifications
Product standard according to IEC
IEC 60794
Flame retardance tested according to UN/ECE-R118
Electrical characteristics
Wavelength information
for 1300 nm applies 1.5 dB / km as well as 500 MHz*km, for 850 nm applies 3.5 dB / km as well as 1500 MHz*km
General information
Brand
HITRONIC®
Product type
Fibre optic cable
Weight
88 kg/km
Fibre optic cable type
GOF
Fibre optic cable type, long designation
Glass fibre
Industry segment
Renewable Energy: Solar
Product characteristics
Application area
Fixed installation
Installation type
Underground installation
Suitable for underground installation
direct, in protective cable conduit
Minimum bending radius, stationary
15 x outer diameter
Minimum bending radius in mm, fixed installation
144 mm
Minimum bending radius, occasionally flexing
20 x outer diameter
Minimum bending radius in mm, occasionally flexing
192 mm
Tensile force fixed installation
3,000 N
Tensile force, short-term
5,700 N
Temperature, fixed installation
-40 °C to 70 °C max. conductor temperature
Temperature, fixed installation min
-40 °C
Temperature, fixed installation max
70 °C
Temperature, occasionally moved
-5 °C to 50 °C max. conductor temperature
Temperature, occasionally moved min
-5 °C
Temperature, occasionally moved max
50 °C
Installation temperature min.
-5 °C
Max. assembly temperature
50 °C
Halogen-free according to
IEC 60754-1
Maximum lateral pressure
5,000 N/dm
Fibre optic cable, core type
Loose tube
Optical cable, insert
Outdoor application
Optical cable, fibre category
OM3
For permanent bending
For torsional load
Reelable
For use in hazardous areas
Flame-retardant
UV-resistant
Halogen-free
Oil-resistant
PWIS-free
Longitudinally watertight
Laterally watertight
Fast Connect (FC) cable
Product design
Numerical aperture
0.2
A optical outdoor cable
A-DQ(ZN)(SR)2Y
Classification of fibre optic cable
Gel-filled loose tube cable
Number of cores
1
Armouring type
Corrugated steel tape
Strain relief due to
Glass yarns
Fibre type
Multi-mode fibre
Number of fibres
12
Number of fibres per core
12
Nominal outer diameter
9.6 mm
Cable shape
Round
Fibre core diameter
50 µm
Fibre sheath diameter
125 µm
Diameter of primary coating
242 µm
Basic material of the fibre core
Glass
Basic material of the fibre sheath
Glass
Basic material of outer sheath
Polyethylene
Basic material of outer sheath, short form
PE
Outer sheath colour
black
Cable sheath RAL colour
RAL 9005
With armouring
With rodent protection
With a solid-core sheath
Tear-thread under sheath
LWL cable HITRONIC® HQW3000 12G 50/125 OM3, GOF, 12x OM3, A-Optical outdoor cable: A-DQ(ZN)(SR)2Y, fixed installation, glass yarns, polyethylene, black, Areas of application: PE outer jacket is largely resistant to acids and alkalis, Suitable for WAN networks, Especially for outdoor use, For fixed installation in pipes and closed installation ducts, Can be used in dry, wet and harsh environments, Withstands high mechanical loads, Can be laid directly underground, For open installation on cable trays, For use in backbone network areas, Benefits: Halogen-free product that does not develop any corrosive acids or gases that are hazardous to health in the event of a fire, With reinforced glass yarns for strain relief, Gel-filled central loose tube ensures longitudinal and transverse watertightness and thus optimal fiber protection,Steel corrugated jacket for increased mechanical stress and maximum rodent protection,No generation of electromagnetic interference due to metal-free materials inside the cable,Low-friction outer jacket and small bending radii enable easy installation of cables,Easy handling due to flexible and compact design,Fiber optic cables with glass optical fiber (GOF) have a high data rate and range,Available in different GOF fiber categories (OM1 - OM4, OS2)