Lapp 2214070, EAN: 4044773098044

Lapp 2214070 ÖLFLEX Tray II CY 7G2,5 qmm 14AWG control cable

Cables > Control line > Flexible Control lines

Lapp 2214070 ÖLFLEX Tray II CY 7G2,5 qmm 14AWG control cable

Lieske Part No. 458364
Mfg Part No 2214070
EAN-Code 4044773098044
Manufacturer Lapp
Here only 17,03 EUR
20,27 EUR incl. VAT

Further information for Lapp 2214070 ÖLFLEX Tray II CY 7G2,5 qmm 14AWG control cable

General
Number of conductors7
Core cross section2,5 mm²
AWG14
Operating voltage0,6/1 kV
Wire identificationnumbers
Shieldingdouble, aluminium-coated foil and copper braided shield
CertificationUL listed
Application rangeindustrial and machine tools, wind turbines, outdoor
Temperature range-25 °C
MaterialPVC
Installationfixed, occasional movement, openly on cable trays
Direct burialin the USA
Torsion applicationswind turbines
Flame retardancyYes
Multiple certificationYes
The control cable ÖLFLEX® TRAY II CY 7G2,5 from Lapp is a flexible, shielded cable specifically developed for industrial applications in Europe and the USA. With 7 conductors and a cross-section of 2.5 mm² (equivalent to 14 AWG), it is suitable for wiring internal machine and plant-wide control circuits. The cable is designed for fixed installation and occasional movement and can be used under moderate mechanical stress. It features double shielding, consisting of an aluminium-laminated foil and a high-coverage copper braided shield, providing effective protection against electromagnetic interference. Conductor identification is done by numbers, enabling clear assignment of conductors during wiring.

Applications

The cable is universally applicable in Europe and suitable for wiring industrial machines, machine tools, and other plants. In the USA, it is used for wiring industrial and machine tools, particularly for open installation on cable trays without additional protective conduit. It is suitable for outdoor use in Europe and the USA, provided the temperature range is observed. In the USA, it can also be buried. A special application field is its use in torsion applications in wind turbines, where the cable meets specific requirements for flexibility and mechanical load capacity.

Functions and Equipment in Detail

The ÖLFLEX® TRAY II CY 7G2,5 is characterised by high oil resistance and flame retardancy, making it suitable for environments with oil contact and increased fire protection requirements. The cable is designed for dry, damp, and oil-containing environments. The double shielding ensures reliable signal transmission and minimises the risk of interference from electromagnetic fields. The flexible construction allows use at temperatures down to -25 °C, enabling application in cool or cold environments.

Technology Explained Simply

The designation 7G2,5 describes a cable with seven individual conductors, each having a cross-section of 2.5 mm². The 14 AWG (American Wire Gauge) specification is the American equivalent for this cross-section. The operating voltage is U0/U: 0.6/1 kV, indicating the maximum voltage between conductor and earth and between conductors. UL certification enables use in the USA and guarantees compliance with local safety standards. Multi-certification reduces part variety and simplifies logistics, as the same cable can be used in different regions.

Compatibility and Accessories

The cable is designed for use in various industrial environments and can be combined with standard cable glands, connectors, and other connection elements suitable for PVC insulation. Installation without additional protection systems such as conduit or cable protection tubes is possible, simplifying installation and reducing costs. The cable is suitable for use in wind turbines in torsion applications, with specific mounting requirements of the respective installation to be considered.

Installation and Mounting

The cable can be installed openly on cable trays without requiring additional protective conduit. Its flexible construction facilitates bending and installation, especially along complex routing paths. Installation must consider maximum bending radii and mechanical load capacity. Use in oil-containing environments requires careful planning of the routing to avoid mechanical damage.

Operational Advantages

Universal applicability in Europe and the USA reduces the need for different cable types in international projects. High oil resistance and flame retardancy increase operational safety, especially in environments with increased fire or contamination risks. Double shielding ensures stable signal transmission, improving the reliability of control systems. The ability to install the cable without additional protection systems reduces installation costs and shortens mounting time. Suitability for outdoor use and torsion applications in wind turbines significantly expands the application range.

Protection Rating

The cable is suitable for outdoor use, with specific environmental conditions, particularly temperature, to be considered. The PVC insulation provides sufficient protection against weather influences, provided temperature limits are observed. UL certification and multi-certification guarantee compliance with applicable standards in respective markets.

Certification

The cable is UL-listed, confirming approval for use in the USA and compliance with local safety requirements. Multi-certification enables universal use in various regions and reduces logistics complexity. Certification also covers requirements for flame retardancy and mechanical load capacity.

Temperature Range

The cable can be used at temperatures down to -25 °C, making it suitable for cold environments. The upper temperature limit is not explicitly stated, but the cable is designed for use in dry, damp, and oil-containing environments, indicating sufficient thermal load capacity. Outdoor use requires consideration of local climate conditions.

Material

The insulation consists of PVC, known for its resistance to oil, moisture, and mechanical stress. Conductor identification is done by numbers, enabling clear assignment of conductors. Double shielding made of aluminium-laminated foil and copper braided shield provides high protection against electromagnetic interference.

Application Environments

The cable is suitable for dry, damp, and oil-containing environments. It can be used in industrial plants, machine tools, wind turbines, and other installations where a flexible, shielded control cable is required. Outdoor use is possible in Europe and the USA, provided temperature conditions are observed.

Use in Wind Turbines

The cable is specifically suitable for torsion applications in wind turbines, where it meets mechanical and electrical requirements for flexibility, shielding, and durability. Double shielding and high oil resistance increase the reliability of control systems in these installations.

Omission of Protection Systems

The cable can be installed without additional protection systems such as conduit or cable protection tubes, simplifying installation and reducing costs. This is particularly possible for open installation on cable trays in the USA.

Oil Resistance and Flame Retardancy

The high oil resistance of the cable protects it against contamination and degradation by oil. Flame retardancy increases operational safety, especially in environments with increased fire risk. These properties are essential for use in industrial applications with high material durability requirements.

Multi-Certification

Multi-certification enables universal use of the cable in various markets, reducing part variety and simplifying logistics. Certification covers requirements for safety, mechanical load capacity, and electrical properties.

The cable is suitable for use in wind turbines in torsion applications, with specific mounting requirements of the respective installation to be considered. Installation without additional protection systems such as conduit or cable protection tubes is possible, simplifying installation and reducing costs. Installation must consider maximum bending radii and mechanical load capacity. Use in oil-containing environments requires careful planning of the routing to avoid mechanical damage. Universal applicability in Europe and the USA reduces the need for different cable types in international projects. High oil resistance and flame retardancy increase operational safety, especially in environments with increased fire or contamination risks. Double shielding ensures stable signal transmission, improving the reliability of control systems. The ability to install the cable without additional protection systems reduces installation costs and shortens mounting time. Suitability for outdoor use and torsion applications in wind turbines significantly expands the application range. UL certification and multi-certification guarantee compliance with applicable standards in respective markets. Outdoor use requires consideration of local climate conditions. The insulation consists of PVC, known for its resistance to oil, moisture, and mechanical stress. Conductor identification is done by numbers, enabling clear assignment of conductors. Double shielding made of aluminium-laminated foil and copper braided shield provides high protection against electromagnetic interference. The cable is suitable for dry, damp, and oil-containing environments. It can be used in industrial plants, machine tools, wind turbines, and other installations where a flexible, shielded control cable is required. Outdoor use is possible in Europe and the USA, provided temperature conditions are observed. The cable is specifically suitable for torsion applications in wind turbines, where it meets mechanical and electrical requirements for flexibility, shielding, and durability. Double shielding and high oil resistance increase the reliability of control systems in these installations. The cable can be installed without additional protection systems such as conduit or cable protection tubes, simplifying installation and reducing costs. This is particularly possible for open installation on cable trays in the USA. High oil resistance protects the cable against contamination and degradation by oil. Flame retardancy increases operational safety, especially in environments with increased fire risk. These properties are essential for use in industrial applications with high material durability requirements. Multi-certification enables universal use of the cable in various markets, reducing part variety and simplifying logistics. Certification covers requirements for safety, mechanical load capacity, and electrical properties.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/458364
qrcode für Lapp 2214070 ÖLFLEX Tray II CY 7G2,5 qmm 14AWG control cable