| General |
| Cable type | S/UTP - |
| Category | Cat.5e - |
| Data transfer rate | 1000 Mbit/s |
| Frequency range | 100 MHz |
| Degree of protection | - - |
| Material | partially bio-based TPU, halogen-free, flame retardant - |
| Colour | Water blue - |
| Certification | UL, CSA - |
| Application area | industrial automation, movable machine parts, drag chains, EtherCAT, EtherNet/IP - |
| Flexibility | over 10 million bending cycles - |
| Chemical resistance | insensitive to mineral oil-based lubricants - |
| Ecological properties | Over 40% renewable raw materials (according to ASTM D6866) - |
| Cabling | up to 60 m - |
| Use in drag chains | Yes - |
| EMC protection | Copper shielding braid with high coverage - |
| Material resistance | insensitive to mineral oil-based lubricants - |
| Colour code | Water blue - |
| Certification standards | UL, CSA - |
| Performance characteristics | corresponds to standard variant made from fossil raw materials - |
| Use in industrial networks | EtherCAT, EtherNet/IP - |
| Sustainability | Bio-based TPU reduces CO2 footprint - |
| Application in moving machine parts | Yes - |
| Data transmission | analog and digital signals up to 100 MHz - |
The Ethernet cable ETHERLINE® FD bioP Cat.5e 4x2x26/19AWG from Lapp is a highly flexible, continuously moving cable designed for use in moving machine parts and drag chains. It is specifically designed for applications requiring high mechanical load capacity and electromagnetic compatibility (EMC). The cable supports protocols such as EtherCAT and EtherNet/IP and is designed for the transmission of digital and analog signals in the frequency range up to 100 MHz. With Cat.5e performance, it enables data transfer rates up to 1000 Mbit/s. The outer jacket is made of partially bio-based TPU material containing over 40% renewable raw materials (according to ASTM D6866), reducing dependence on fossil raw materials and lowering the CO2 footprint. The product properties correspond to those of the standard variant made from purely fossil raw materials.
Applications
The cable is designed for use in dynamic environments, particularly in drag chains and moving machine parts where high bending loads occur. It is suitable for termination as a patch cable up to a length of 60 meters. Application areas include industrial automation systems, especially those using EtherCAT or EtherNet/IP protocols. The cable is also suitable for environments with high EMC requirements, such as in manufacturing industry or for controlling machines with high electrical interference.
Functions and Equipment in Detail
The cable features an S/UTP structure (Screened/Unshielded Twisted Pair), where individual pairs are not shielded, but the entire cable is equipped with a copper shielding braid. This braid provides high coverage and effectively protects against electromagnetic interference. The outer jacket is made of PUR (polyurethane) and is halogen-free, reducing fire hazard in case of fire. The material is resistant to mineral oil-based lubricants and chemically resistant, extending its service life in industrial environments.
Technology Explained Simply
The designation Cat.5e refers to the category of the Ethernet cable, enabling a maximum data rate of 1000 Mbit/s. The S/UTP structure means the entire cable is shielded, while individual pairs are not shielded. This is a common construction for industrial applications where sufficient interference protection is required. The cable is designed for use in moving systems, proven by its high flexibility and successful testing for over 10 million bending cycles in a drag chain. The use of bio-based TPU in the outer jacket reduces the ecological footprint without impairing performance characteristics.
Compatibility and Accessories
The cable is suitable for use with EtherCAT and EtherNet/IP systems, making it usable in modern industrial networks. UL/CSA certification enables use in the North American market. The cable is intended for termination up to 60 m in length, with exact termination performed by the user or specialist dealer.
Installation and Mounting
Installation is carried out in moving machine parts and drag chains, where the high flexibility and mechanical robustness of the cable facilitate mounting. The cable can be integrated into existing systems supporting EtherCAT or EtherNet/IP. Termination is performed according to requirements, with a maximum length of 60 meters. No special tools or additional components are required beyond those standard for Ethernet cables.
Operational Advantages
The cable offers high mechanical load capacity and is designed for continuous movement. The EMC protection provided by the copper shielding braid ensures stable data transmission even in interference-prone environments. The use of halogen-free and flame-retardant materials reduces fire hazard. The bio-based outer jacket contributes to sustainability without impairing performance characteristics. UL/CSA certification extends the application range to the North American market.
Protection Rating
The cable is not marked with a specific protection rating (e.g., IP). The specifications refer to the mechanical robustness and chemical resistance of the material, not an IP classification.
Operating Voltage
The cable is designed for data transmission and not for electrical power transmission.
Material
The outer jacket is made of partially bio-based TPU material containing over 40% renewable raw materials. The material is halogen-free and flame-retardant. The internal conductors are made of copper, arranged in pairs as twisted pairs.
Color
The cable is available in water blue color, enabling easy identification in cable harnesses.
Certification
The cable is UL- and CSA-certified, enabling use in the North American market.
Application Area
The cable is intended for industrial applications in moving machine parts and drag chains. It is specifically suitable for systems with high EMC requirements and for use with EtherCAT and EtherNet/IP protocols.
Cable Type
The cable is an S/UTP Ethernet cable with Cat.5e performance. The construction enables high data transfer rates and effective protection against electromagnetic interference.
Bending Resistance
The cable has been successfully tested for over 10 million bending cycles in a drag chain, confirming its suitability for continuous movement.
Chemical Resistance
The outer jacket is resistant to mineral oil-based lubricants and chemically resistant, extending its service life in industrial environments.
Ecological Properties
The bio-based outer jacket contains over 40% renewable raw materials (according to ASTM D6866) and reduces the CO2 footprint. The product properties correspond to those of the standard variant made from fossil raw materials.
Data Transfer Rate
The cable offers Cat.5e performance with a maximum data transfer rate of 1000 Mbit/s.
Frequency Range
The cable is designed for transmission of analog and digital signals in the frequency range up to 100 MHz.
Approval
UL and CSA certification enables use in the North American market.
Termination
The cable is suitable for termination as a patch cable up to a length of 60 meters. Exact termination is performed according to user or specialist dealer requirements.
Connection Type
The cable is supplied as an open cable without pre-installed connectors. The connection type therefore depends on the specific termination and connectors used.
Use in Drag Chains
The cable is specifically designed for use in drag chains and has been successfully tested for over 10 million bending cycles, confirming its suitability for continuous movement.
EMC Protection
The copper shielding braid provides high coverage and effectively protects against electromagnetic interference, which is important in environments with high EMC requirements.
Material Resistance
The outer jacket is resistant to mineral oil-based lubricants and chemically resistant, extending its service life in industrial environments.
Color Code
The water blue color enables easy identification in cable harnesses and is standard for this cable.
Certification Standards
UL and CSA certification meet technical requirements for use in the North American market.
Performance Characteristics
The performance characteristics correspond to those of the standard variant made from purely fossil raw materials, even though the outer jacket is partially bio-based.
Use in Industrial Networks
The cable is suitable for use in industrial networks, especially for systems using EtherCAT or EtherNet/IP protocols. The high mechanical load capacity and EMC protection make it a suitable solution for modern automation systems.
Sustainability
The use of bio-based TPU in the outer jacket reduces dependence on fossil raw materials and the CO2 footprint, without impairing performance characteristics.
Application in Moving Machine Parts
The cable is specifically designed for use in moving machine parts where high bending loads occur. The high flexibility and mechanical robustness enable long-term use in such environments.
Data Transmission
The cable enables transmission of digital and analog signals in the frequency range up to 100 MHz, ensuring stable and fast data transmission.
Applications
The cable is intended for use in moving machine parts and drag chains, particularly in industrial automation systems using EtherCAT or EtherNet/IP protocols. The high mechanical load capacity and EMC protection make it a suitable solution for dynamic environments.
Functions and Equipment in Detail
The cable features an S/UTP structure with a copper shielding braid providing high coverage. The outer jacket is made of halogen-free, flame-retardant PUR material and is resistant to mineral oil-based lubricants. The bio-based variant contains over 40% renewable raw materials.
Technology Explained Simply
The Cat.5e performance enables a data rate of up to 1000 Mbit/s. The S/UTP structure protects against electromagnetic interference. The cable is designed for continuous movement, confirmed by testing for over 10 million bending cycles.
Compatibility and Accessories
The cable is suitable for EtherCAT and EtherNet/IP systems. UL/CSA certification allows use in the North American market.
Installation and Mounting
Installation is carried out in moving machine parts and drag chains. Termination is up to 60 m in length. No special tools are required.
Operational Advantages
The cable offers high mechanical load capacity, EMC protection, chemical resistance, and sustainability through the bio-based outer jacket. UL/CSA certification extends the application range.
Protection Rating
The cable is not marked with a specific protection rating (e.g., IP).
Operating Voltage
The cable is designed for data transmission; no operating voltage specified.
Material
Outer jacket: partially bio-based TPU, halogen-free, flame-retardant. Conductors: copper, twisted pair.
Color
Water blue.
Certification
UL- and CSA-certified.
Application Area
Industrial automation, moving machine parts, drag chains, EtherCAT, EtherNet/IP.
Cable Type
S/UTP, Cat.5e.
Bending Resistance
Over 10 million bending cycles in drag chain.
Chemical Resistance
Resistant to mineral oil-based lubricants.
Ecological Properties
Over 40% renewable raw materials in outer jacket (according to ASTM D6866).
Data Transfer Rate
Up to 1000 Mbit/s.
Frequency Range
Up to 100 MHz.
Approval
UL- and CSA-certification.
Termination
Up to 60 m length.
Connection Type
Without pre-installed connectors.
Use in Drag Chains
Specifically designed, successfully tested.
EMC Protection
Copper shielding braid with high coverage.
Material Resistance
Resistant to mineral oil-based lubricants.
Color Code
Water blue.
Certification Standards
UL- and CSA-certification.
Performance Characteristics
Corresponds to standard variant made from fossil raw materials.
Use in Industrial Networks
Suitable for EtherCAT and EtherNet/IP systems.
Sustainability
Bio-based TPU reduces CO2 footprint.
Application in Moving Machine Parts
Specifically for high bending loads.
Data Transmission
Analog and digital signals up to 100 MHz.