Lapp 21700591, EAN: 4044776704140

Lapp 21700591 ED-CAN-AX-PRO CAN-bus connector 180° axial

Industrial Material > Industrial Connectors > Small connector

Lapp 21700591 ED-CAN-AX-PRO CAN-bus connector 180° axial

Lieske Part No. 1325951
Mfg Part No 21700591
EAN-Code 4044776704140
Manufacturer Lapp
Here only 89,93 EUR
107,02 EUR incl. VAT

Further information for Lapp 21700591 ED-CAN-AX-PRO CAN-bus connector 180° axial

General
Connector typeData connector
Bus typeCAN
Plug connectionSub-D female connector
Modelstraight (180 °)
Bus terminationswitchable
MaterialFull metal
Application environmentrough environment
EMC propertiesEMC-critical environment
Cable clamping rangeextended
Certifications
CE markingyes
UL recognizedno
UL listedno
cUR recognisedno
cUL listedno
CSA certifiedno
Electrical characteristics
Impedance120 Ω
General information
BrandEPIC®
Product typeData connector
Weight0.103 kg
Delivery Unit1
valid fieldbus or Ethernet systemCAN
Product characteristics
Variant of the Sub-DSwitchable bus terminator
Min. number of insertion cycles200
IP protection ratingIP 30
For use in hazardous areasno
UV-resistantno
Fast Connect (FC) cableno
Product design
Total length80.9 mm
Overall width36.1 mm
Overall height14.8 mm
Connector housing designStraight
Connector formatSub-D
Connector typeSocket
Connector housing angle180 °
For min. cable outer diameter7 mm
For max. cable outer diameter10 mm
Assembly typeField configurable
Min. connectable conductor cross-section fine-wire (AWG)28 AWG
Max. connectable conductor cross-section fine-wire (AWG)14 AWG
Housing base materialZinc alloy
Housing base material, short formZn
Pin assignmentCAN Low = Pin 2, CAN Gnd = Pin 3, CAN High = Pin 7, CAN V+ = Pin 9
Shieldedyes
Codedno
With threadno
Reusableyes
Diagnostic interfaceno
The ED-CAN-AX-PRO from Lapp is a data connector of the EPIC® product series, specifically designed for use in CAN- and CANopen-based fieldbus networks. It features a 9-pin Sub-D female connector and is provided as a straight (180°) version with axial cable exit. The housing is made of zinc alloy and is fully metallic, ensuring high mechanical stability and improved protection against electromagnetic interference. The integrated, switchable termination resistor function, operated via a sliding lever, allows flexible use as either a pass-through or terminating connector. The pin assignment corresponds to the CAN bus specification: CAN Low at pin 2, CAN Gnd at pin 3, CAN High at pin 7, and CAN V+ at pin 9.

Applications
This connector is intended for use in automation technology, machine and plant engineering. It is particularly suitable for harsh environments and EMC-critical applications where reliable data transmission is required. The maximum data transfer rate is 1 Mbit/s, making it suitable for typical industrial communication requirements. The operating temperature ranges from -20 °C to +70 °C, enabling use in a wide range of industrial environments.

Functions and Equipment in Detail
The ED-CAN-AX-PRO features an external cable clamp that ensures strain relief for connected cables. The cable clamping area is extended, allowing installation of cables with an outer diameter of 7 to 10 mm. Individual wire connections are made via screw terminals designed for fine-stranded conductor cross-sections from 0.08 to 0.5 mm² (equivalent to AWG 28 to AWG 14). This design allows for simple, tool-free termination, reducing installation time. The screw locking follows the Sub-D/UNC 4-40 standard.

Technology Explained Simply
The connector has an impedance of 120 Ω, matching the standard impedance for CAN bus systems and ensuring stable signal transmission. The switchable bus termination function allows the connector to be used as either a terminating or pass-through connector depending on the network architecture, without requiring additional components. The metallic housing provides high protection against electromagnetic interference, which is particularly beneficial in industrial environments with high EMC risk. The IP rating of IP 30 protects against solid foreign objects with a diameter of at least 2.5 mm, but does not protect against water.

Compatibility and Accessories
The connector is designed for CAN/CANopen-compliant cables and can be used in existing CAN networks. It is field-terminable and reusable, simplifying maintenance and replacement. The pin assignment matches the common CAN bus specification, ensuring direct compatibility with standard connectors. A variant with a second D-Sub interface for programming and diagnostics is also available, but is not part of this product.

Mounting and Installation
Mounting is done via screw terminals, ensuring a secure connection for individual wires. The external cable clamp provides effective strain relief and prevents mechanical stress on the cables. The axial design and straight configuration (180°) allow for compact installation, especially in systems with limited space. The maximum number of mating cycles is 200, providing sufficient service life for typical industrial applications.

Advantages in Operation
The ED-CAN-AX-PRO offers high functional reliability and failure protection, especially in harsh environments. The simple, tool-free installation reduces installation time and error susceptibility. The integrated bus termination function enables flexible network design, while the metallic housing construction ensures high EMC immunity. The combination of compact design and robust materials makes it a reliable solution for industrial communication applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1325951
qrcode für Lapp 21700591 ED-CAN-AX-PRO CAN-bus connector 180° axial