Lapp 2170007/100, EAN: 4044774748580

Lapp 2170007/100 coaxial cable RG-223/U 50 Ohm

Cables > Data lines > Data cables coaxial

Lapp 2170007/100 coaxial cable RG-223/U 50 Ohm

Lieske Part No. 456723
Mfg Part No 2170007/100
EAN-Code 4044774748580
Manufacturer Lapp
Here only 245,61 EUR
292,28 EUR incl. VAT

Further information for Lapp 2170007/100 coaxial cable RG-223/U 50 Ohm

General
Cable typeCoaxial cable
Rated shaft resistance50 Ohm
Insulating materialPVC
Conductor diameter0.89 mm
Installation methodFixed installation
Temperature range-40 to 80 °C
ColourBlack
Application areafor radio and computer systems, high-frequency technology, electronics
Operating environmentdry, damp, outdoor
The RG-223/U coaxial cable from Lapp is a fixed installation data cable with a nominal wave impedance of 50 Ohm, specifically designed for signal transmission in high-frequency applications. It is suitable for use in radio and computer systems as well as in the entire field of electronics and high-frequency technology. The cable is designed for shorter transmission distances and features low-loss and distortion-free signal transmission. The special cable construction ensures high immunity to external interference, making it suitable for applications in technically demanding environments.

Applications
This cable is intended for fixed installation and can be moved occasionally. It is suitable for use in dry and damp environments, including outdoor areas, provided the temperature range of -40 °C to 80 °C is not exceeded. Use in environments with high thermal and chemical loads is also intended, increasing its versatility in industrial and technical installations.

Functions and Equipment in Detail
The coaxial cable has a nominal wave impedance of 50 Ohm, ensuring optimal impedance matching in high-frequency systems. The insulation is made of PVC, providing good mechanical stability and chemical resistance. The conductor diameter is 0.89 mm, sufficient for adequate current and signal transmission at moderate frequencies. The cable is black in colour, making it inconspicuous for use in technical installations.

Technology Explained Simply
The term coaxial cable refers to a cable in which the signal conductor runs centrally within a shield conductor, achieving high electromagnetic shielding. The nominal wave impedance of 50 Ohm is a standard value in high-frequency technology, ensuring minimal reflection and maximum energy transfer. The PVC insulation provides protection against mechanical stress and chemical influences. The protection rating is not explicitly stated, but the cable is suitable for outdoor use, indicating sufficient resistance to moisture and weather conditions.

Compatibility and Accessories
The cable is designed for use in systems requiring a wave impedance of 50 Ohm, such as radio systems, antenna systems, or measuring instruments. The wide range of variants allows adaptation to specific requirements, with wave impedance and attenuation depending on the respective cable construction.

Installation and Mounting
The cable is intended for fixed installation and can be moved occasionally. It should be installed in environments where the temperature ranges between -40 °C and 80 °C. Installation is typically done using standard tools, with the mechanical stability of the PVC jacket enabling easy handling.

Operational Advantages
The low-loss and distortion-free signal transmission ensures high signal quality, especially in high-frequency applications. Immunity to external interference reduces the need for additional shielding measures. Suitability for dry, damp, and outdoor environments expands application possibilities. High thermal and chemical resistance increases the cable's service life in demanding environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/456723
qrcode für Lapp 2170007/100 coaxial cable RG-223/U 50 Ohm