| General |
| Degree of protection | suitable for outdoor use, subject to temperature range |
| Operating voltage | 300/500 V |
| Core cross section | 3G0,5 mm² |
| Wire identification | numbers |
| Shielding | Copper shielding braid with high coverage |
| Outer sheath material | PUR |
| Mechanical properties | abrasion-, notch- and cut-resistant |
| Chemical resistance | Oil-resistant, resistant to various chemicals |
| Operating conditions | Fixed installation, occasional movement without tensile stress |
| Application areas | industrial and machine tools, transfer lines |
| EMC protection | high, due to copper shielding braid |
| Flame retardancy | Classified according to EU Directive 305/2011 (BauPVO/CPR) |
| Outer diameter | smaller due to omission of inner sheath |
The control cable ÖLFLEX® CLASSIC 415 CP 3G0,5 from Lapp is a flexible, shielded cable designed for use in industrial applications. It is intended for fixed installation as well as for occasional movements without tensile stress, and is particularly suitable for environments where electromagnetic compatibility (EMC) is required. The cable features a PUR outer sheath that withstands mechanical stresses such as abrasion, notching, and cutting, while also being chemically resistant and highly oil-resistant. Due to these properties, it is suitable for use in dry, wet, rough, and oily environments, including outdoor use, provided the temperature range is observed.
Applications
This control cable is universally applicable for wiring internal machine and plant-wide control circuits. Typical applications include industrial and tool machines, as well as transfer lines. The cable is designed for applications requiring high mechanical robustness and chemical resistance, particularly in environments with increased wear or oil contact.
Functions and Features in Detail
The cable features a copper braided shield with high coverage, providing effective protection against electromagnetic interference. The conductors are numbered for easy identification, simplifying wiring and maintenance. The absence of an inner sheath results in lower weight and a smaller outer diameter, making handling and installation easier. The cable is flexible and suitable for occasional movements without tensile stress.
Technical Explanation
The PUR outer sheath offers high mechanical strength and is resistant to numerous chemicals, especially oil. Shielding via the copper braid ensures good EMC performance, which is important in industrial environments with many electrical devices. The rated voltage is U0/U: 300/500 V, sufficient for most control applications. The cable is suitable for outdoor use, provided the temperature limits are observed.
Compatibility and Accessories
The control cable is designed for use in industrial machines and plants. It can be connected to standard connectors, cable lugs, and other connection elements suitable for control cables with a 0.5 mm² cross-section. The use of accessories such as cable ties or protective conduits is recommended depending on the application to enhance mechanical stability.
Installation and Mounting
The cable is flexible and easy to install. During mounting, care must be taken to avoid tensile stress, as the cable is only designed for occasional movements without tension. Outdoor installation is possible, but the temperature range must be respected. Conductors are connected using appropriate connection elements, with numbered conductor identification simplifying assignment.
Operational Advantages
The cable is characterised by high durability and resistance to mechanical and chemical stresses. The combination of PUR sheath and copper shielding ensures reliable signal transmission even in noisy environments. The reduced height and lower weight simplify installation and reduce space requirements. The classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) enables use in installations subject to these requirements.
Protection Rating
Outdoor use is possible, provided the temperature range is observed. The chemical resistance of the PUR sheath protects against oil and other chemicals.
EMC Protection
The integrated copper shielding braid provides high protection against electromagnetic interference, which is crucial for signal integrity in industrial control systems. The shielding is designed with high coverage to ensure effective shielding.
The cable is designed for use in industrial machines and plants. The use of accessories such as cable ties or protective conduits is recommended depending on the application to enhance mechanical stability.
Fire Behaviour
The cable meets the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding fire behaviour. The exact classification can be selected on the LAPP website by entering the article number.
Material and Construction
The outer sheath is made of PUR, which is abrasion-, notch-, and cut-resistant. The conductors are numbered, simplifying identification and wiring. The cable is shielded, with the copper braided shield providing EMC protection. The absence of an inner sheath results in lower weight and a smaller outer diameter.
Application Environment
The cable is suitable for dry, wet, rough, and oily environments. It can be used outdoors, provided the temperature limits are observed. The chemical resistance of the PUR sheath protects against oil and other chemicals.