Lapp 1136907, EAN: 4044773090505

Lapp 1136907 ÖLFLEX CLASSIC 115 CY 7X1,5 control cable shielded

Cables > Control line > Flexible Control lines

Lapp 1136907 ÖLFLEX CLASSIC 115 CY 7X1,5 control cable shielded

Lieske Part No. 457895
Mfg Part No 1136907
EAN-Code 4044773090505
Manufacturer Lapp
Here only 4,68 EUR
5,57 EUR incl. VAT

Further information for Lapp 1136907 ÖLFLEX CLASSIC 115 CY 7X1,5 control cable shielded

General
Operating voltage300/500 V
Number of conductors7
Core cross section1,5 mm²
Insulating materialPVC
Outer sheath materialPVC
ScreeningCopper shield braid
Wire identificationnumbers
Flame retardancyin accordance with EU Directive 305/2011 (BauPVO/CPR)
ApplicationFor medium mechanical stress, fixed installation, occasional movement without tensile stress
Application rangeDry and wet rooms, wind turbines (torsion applications)
Chemical resistanceResistant to acids, alkalis, conditionally oil-resistant, ECOLAB® cleaning agents
Constructionwithout inner sheath, reduced wall thickness
The control cable ÖLFLEX® CLASSIC 115 CY 7X1.5 from Lapp is a flexible, shielded cable for use in industrial applications. It is suitable for medium mechanical stress and is used for fixed installation as well as for occasional movements without tensile stress. The cable is universally applicable for wiring of machine-internal and plant-wide control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, enabling use in dry and damp rooms. The cable construction is also suitable for torsion applications in wind turbines.

Control cable is the product type designed for transmitting control signals in electrical and electronic systems. The designation ÖLFLEX CLASSIC 115 CY identifies the product series and specific configuration. The configuration 7X1.5 means that the cable consists of seven individual conductors, each with a cross-section of 1.5 mm². This number and size of conductors enable flexible use in various control systems where multiple signal channels are required.

Shielded is a central feature of this cable. Shielding is achieved through a copper braided shield with high coverage, providing effective protection against electromagnetic interference. This is particularly important in environments with high electromagnetic noise, such as production plants or when used near motors and transformers. The shielding ensures that transmitted signals are not impaired by external interference sources.

PVC as insulating and outer sheath material offers good mechanical strength and chemical resistance. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, making the cable suitable for industrial environments. The reduced wall thickness of the outer sheath ensures a space-saving design, while the omission of an inner sheath results in lower overall weight and smaller outer diameter. This facilitates installation and routing, especially in tight or confined spaces.

The cable is rated for an operating voltage of U0/U: 300/500 V, making it suitable for use in many industrial control applications. Conductor identification is done via numbers, simplifying the assignment of individual conductors during wiring. The tested resistance to ECOLAB® disinfectants and cleaning agents makes the cable suitable for applications in areas with high hygiene requirements, such as the food industry or medical sector.

Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) is another feature that underscores the cable’s safety. Classification is determined via article number selection on the LAPP website, allowing the exact fire behaviour class to be identified for the specific application. This is particularly important for applications in buildings or plants where fire protection regulations apply.

The cable is suitable for use in dry and damp rooms, increasing its versatility. The combination of flexible structure, chemical resistance, and electromagnetic shielding makes it a robust solution for various industrial requirements. Its use in wind turbines, particularly in torsion applications, demonstrates the cable’s durability and reliability under dynamic conditions.

The ÖLFLEX® CLASSIC 115 CY 7X1.5 control cable is thus a reliable and versatile solution for wiring in industrial control systems. Its construction with copper braided shield, PVC sheath, and reduced wall thickness offers an optimal balance of performance, safety, and ease of installation.

Flexible describes the mechanical property of the cable, allowing it to be used for occasional movements without tensile stress. This is particularly advantageous in plants where parts are moved, but continuous cable movement is not required. The flexible structure also facilitates routing and installation in complex plant structures.

Torsion applications in wind turbines require a cable that can withstand mechanical loads from rotational movements. The specific construction of the ÖLFLEX CLASSIC 115 CY 7X1.5 enables this, allowing its use even in demanding environments such as wind turbines. The combination of mechanical strength and electrical reliability makes it a suitable choice for such applications.

The cable is suitable for use in dry and damp rooms, increasing its versatility. The chemical resistance to acids, alkalis, and conditionally also to oil, as well as the tested resistance to ECOLAB® cleaning agents, expands its application range across various industrial sectors. Classification according to EU Directive 305/2011 (BauPVO/CPR) ensures clear assignment of fire behaviour, which is important for compliance with safety regulations.

The use of numbers for conductor identification simplifies wiring and reduces error sources during installation. The combination of 7 conductors, each with a cross-section of 1.5 mm², provides sufficient capacity for many control applications. The operating voltage of 300/500 V is sufficient for most industrial control systems and ensures reliable signal transmission.

The specifications refer exclusively to indoor use, particularly in dry and damp rooms. Use in wind turbines refers to torsion applications within the turbine, not to outdoor exposure in terms of weather influences.

The ÖLFLEX® CLASSIC 115 CY 7X1.5 control cable thus offers a robust, flexible, and safety-compliant solution for wiring in industrial plants. Its specific properties such as shielding, chemical resistance, and mechanical strength make it a suitable choice for a wide range of applications, particularly in manufacturing, energy generation, and plants with high hygiene requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/457895
qrcode für Lapp 1136907 ÖLFLEX CLASSIC 115 CY 7X1,5 control cable shielded