| General |
| Cross section | 3X1,5 mm² |
| Operating voltage | 300/500 V |
| Wire identification | numbers |
| Material | PVC |
| Screening | Copper shield braid |
| Application | Fixed installation, occasional movement without tensile stress |
| Application range | dry and damp rooms |
| Flame retardancy | in accordance with EU Directive 305/2011 (BauPVO/CPR) |
| Torsion application | suitable for wind turbines |
| Resistance | Resistant to acids, alkalis, conditionally oil-resistant, ECOLAB® cleaning agents |
| Construction | without inner sheath |
| Outer diameter | small |
| Cable type | Flexible, shielded |
| Manufacturer | Lapp |
The control cable ÖLFLEX® CLASSIC 115 CY 3X1.5 from Lapp is a flexible, shielded cable for use in industrial applications. It is suitable for moderate mechanical stress and is used for fixed installation as well as occasional movement without tensile stress. The cable is universally applicable for wiring of machine-internal and plant-wide control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, enabling use in various industrial environments. The construction without an inner sheath results in lower weight and smaller outer diameter, supporting space-saving installation.
Applications
The cable is suitable for use in dry and damp rooms and can be used in various industrial sectors, particularly in plants requiring occasional movement but no continuous tensile load. A special feature is its suitability for torsion applications in wind turbines, allowing use in demanding environments with rotational movements. The tested resistance to ECOLAB® disinfectants and cleaning agents also makes it suitable for applications in the food industry or healthcare.
Functions and Equipment in Detail
The control cable features wire identification by numbers, which simplifies the assignment of individual conductors during wiring. The cable is equipped with a copper shielding braid that has a high coverage rate, providing effective protection against electromagnetic interference. This is particularly important in environments with high electromagnetic interference, such as production plants or when used near motors and transformers.
Technology Explained Simply
The operating voltage is U0/U: 300/500 V, qualifying the cable for typical control and signal circuits in industry. The PVC outer sheath offers good mechanical and chemical resistance. The construction without an inner sheath reduces overall weight and outer diameter, facilitating installation in confined spaces. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), ensuring a uniform assessment of fire behaviour. The selection of the appropriate article number is available via the LAPP website.
Compatibility and Accessories
The cable is designed for use in various industrial plants and can be connected with standard connectors and plugs suitable for control cables with 1.5 mm² cross-section. Use in wind turbines requires special mounting and installation techniques to meet the requirements of torsion applications. The cable is not specifically designed for outdoor use or in explosive environments, unless explicitly stated in the product description.
Installation and Mounting
The cable is intended for fixed installation and can be occasionally moved, provided no tensile stress occurs. Installation follows standard procedures for control cables, taking into account the mechanical and electrical requirements of the respective plant. Installation in confined spaces is facilitated by the reduced outer diameter. Connection of the conductors is made via suitable plug connectors or solder joints, with wire identification by numbers supporting assignment.
Operational Advantages
The combination of low weight, small outer diameter, and high mechanical resistance enables efficient and flexible installation. Protection against electromagnetic interference provided by the copper shielding braid ensures reliable signal transmission. Resistance to acids, alkalis, and ECOLAB® cleaning agents increases service life and reduces maintenance effort. Suitability for torsion applications in wind turbines extends the application range to demanding environments.
Protection Rating
The cable is not specifically designed for a particular protection rating such as IP67, but for use in dry and damp indoor environments. Use outdoors or in environments with high mechanical loads requires separate evaluation of requirements.
Cable Type
The control cable ÖLFLEX® CLASSIC 115 CY 3X1.5 is a flexible, shielded cable with PVC insulation and outer sheath. The construction without an inner sheath reduces weight and diameter, facilitating installation. Wire identification is by numbers, simplifying wiring.
Fire Behaviour
The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), ensuring a uniform assessment of fire behaviour. The exact classification is available via the LAPP website, depending on the article number.
Application Area
The cable is universally applicable in industrial electrical engineering, particularly in machine building, plant engineering, and wind energy installations. Suitability for torsion applications in wind turbines is a specific use case highlighting the flexibility and mechanical robustness of the cable.
Material
The outer sheath is made of PVC, resistant to acids, alkalis, and conditionally oil-resistant. The conductors are made of copper, ensuring good electrical conductivity. The shielding braid is also made of copper, ensuring electromagnetic protection.