| General |
| Degree of protection | shielded |
| Wire identification | numbers |
| Insulating material | PVC |
| Operating voltage | 300/500 V |
| Number of cores | 4 |
| Core cross section | 25 mm² |
| Screening | Copper shield braid |
| Flame retardancy | in accordance with EU Directive 305/2011 (BauPVO/CPR) |
| Chemical resistance | resistant to acids, alkalis, ECOLAB® cleaning agents |
| Operating conditions | For fixed installation and occasional movement without tensile stress |
| Applications | Machine internal and plant-wide control circuits, wind turbines, dry and damp rooms |
| Construction | without inner sheath |
The control cable ÖLFLEX® CLASSIC 115 CY 4G25 from Lapp is a flexible, shielded cable designed for industrial applications. It is suitable for medium mechanical stress and is used for fixed installation as well as occasional movement without tensile load. The cable is universally applicable for wiring internal machine and plant-wide control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, expanding its application possibilities in various industrial environments. The cable is suitable for use in dry and damp rooms and can also be used in torsion applications in wind turbines.
Control cable is the product type, specifically designed for transmitting control signals in electrical installations. The designation
ÖLFLEX CLASSIC 115 CY 4G25 describes the type, where 4G25 indicates the number of conductors (four) and the cross-section (25 mm² per conductor). The cable is equipped with a
copper braid shield that offers high coverage, providing effective protection against electromagnetic interference. This is particularly important in environments with high electromagnetic interference, such as production facilities or in automation technology.
PVC as insulating and protective sheath material offers good mechanical strength and chemical resistance. The reduced wall thickness of the outer sheath enables a space-saving design, while the absence of an inner sheath results in lower overall weight and a smaller outer diameter. This facilitates installation and mounting, especially in tight or confined installation situations.
The cable is rated for an operating voltage of U0/U: 300/500 V, making it suitable for a wide range of industrial applications. Conductor identification is done by numbers, enabling simple and unambiguous assignment of conductors during installation. The verified resistance to ECOLAB® disinfectants and cleaning agents makes the cable suitable for applications in the food industry or in medical environments, where high hygiene standards apply.
The cable meets the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding fire behaviour. Classification is carried out according to the article number selection on the LAPP website, ensuring compliance with applicable construction product regulations. This is particularly important for applications in buildings or plants subject to specific safety and fire protection regulations.
Applications include wiring in machines and plants, particularly in the manufacturing industry, automation technology, and the energy sector. Suitability for torsion applications in wind turbines demonstrates the cable’s robustness and reliability under dynamic loads. The flexible structure enables easy handling during installation, while the shielded construction ensures signal integrity.
Shielded is a key feature describing electromagnetic shielding. The
flexible design allows easy installation and adaptation to different geometries. The
PVC insulation provides chemical resistance and mechanical strength.
Conductor identification by numbers simplifies installation and maintenance.
Classification according to EU Directive 305/2011 ensures compliance with applicable construction product standards.
The cable is suitable for use in dry and damp rooms, enabling broad applicability in various industrial environments. Resistance to acids, alkalis, and ECOLAB® cleaning agents increases service life and reliability under demanding operating conditions. The construction without an inner sheath reduces weight and outer diameter, facilitating installation and saving space.
The control cable ÖLFLEX® CLASSIC 115 CY 4G25 is therefore a powerful and versatile solution for industrial control applications requiring high demands on mechanical strength, chemical resistance, and electromagnetic shielding. The combination of flexible structure, shielded construction, and PVC insulation makes it a reliable choice for wiring in machines, plants, and the energy sector.
The cable is designed for fixed installation and occasional movement without tensile load, making it suitable for many industrial application scenarios. Use in wind turbines under torsional stress demonstrates its mechanical robustness. Verified resistance to disinfectants expands its application possibilities in hygienically demanding areas.
The control cable is suitable for use in dry and damp rooms, enabling broad applicability in various industrial environments. Resistance to acids, alkalis, and ECOLAB® cleaning agents increases service life and reliability under demanding operating conditions. The construction without an inner sheath reduces weight and outer diameter, facilitating installation and saving space.
The control cable ÖLFLEX® CLASSIC 115 CY 4G25 is therefore a powerful and versatile solution for industrial control applications requiring high demands on mechanical strength, chemical resistance, and electromagnetic shielding. The combination of flexible structure, shielded construction, and PVC insulation makes it a reliable choice for wiring in machines, plants, and the energy sector.