| General |
| Degree of protection | shielded |
| Wire identification | numbers |
| Operating voltage | 300/500 V |
| Test voltage | 4000 V |
| Insulating material | PVC |
| Outer sheath material | PVC |
| Screening | Copper shield braid |
| VDE registration number | 7030 |
| Flame retardancy | in accordance with EU Directive 305/2011 (BauPVO/CPR) |
| Application | For medium mechanical stress, fixed installation, occasional movement without tensile stress |
| Operating environment | dry and damp rooms |
| Cable type | ÖLFLEX CLASSIC 110 CY 2X10 |
| Manufacturer | Lapp |
| Construction | Flexible |
| Chemical resistance | Resistant to acids and alkalis, conditionally oil-resistant |
| Space-saving | by reduced wall thicknesses |
The control cable ÖLFLEX® CLASSIC 110 CY 2X10 from Lapp is a flexible, shielded cable for use in industrial control and regulation circuits. It is suitable for medium mechanical stress and is used for fixed installation as well as occasional movement without tensile stress. The cable is universally applicable for wiring internal machine and plant-wide control circuits and can be installed in dry and damp rooms. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, which expands its application possibilities in various industrial environments.
Applications
The control cable is designed for applications requiring high electrical safety and electromagnetic compatibility (EMC). It is commonly used in automation technology, machine and plant engineering, as well as in electrical installations. The cable is suitable for use in dry and damp rooms, with no specific requirements stated for ambient temperature or humidity. It is used in fixed installations where occasional movements without tensile load occur.
Functions and Features in Detail
The cable features a copper shielding in the form of a braid with high coverage, providing effective protection against electromagnetic interference (EMC). Conductor identification is done by numbers, enabling clear assignment of conductors during wiring. The PVC insulation and outer sheath ensure high mechanical stability and chemical resistance. The cable is designed to be flexible, ensuring reliable performance during occasional movements without tensile stress.
Technology Explained Simply
The control cable is equipped with a test voltage of 4000 V, ensuring high electrical safety. The operating voltage is U0/U: 300/500 V, which is sufficient for most industrial control applications. The reduced wall thickness of the outer sheath enables space-saving installation, especially in tight installation situations. The copper shielding protects signals from external electromagnetic interference, which is crucial for the reliability of control and regulation circuits. The cable is VDE-tested and carries registration number 7030.
Compatibility and Accessories
The control cable is universally applicable and can be combined with various connectors, cable lugs, and other connection elements suitable for PVC insulation. The classification of fire behaviour is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification available on the LAPP website by article number.
Installation and Mounting
Installation is done by fixed routing, allowing occasional movements without tensile stress. Conductors are connected using appropriate connection elements, with numbering enabling secure identification. Mounting does not require special tools, but relevant installation standards must be observed.
Advantages in Operation
The control cable offers high reliability through EMC protection and electrical safety. Its flexible design enables easy installation and maintenance, while the chemical resistance of the PVC sheath extends the cable’s service life. The space-saving design due to reduced wall thickness is particularly advantageous in complex installations. VDE testing and classification according to BauPVO/CPR ensure compliance with applicable standards and regulations.