| General |
| Degree of protection | shielded |
| Wire identification | numbers |
| Operating voltage | 300/500 V |
| Test voltage | 4000 V |
| Insulating material | PVC |
| Screening | Copper shield braid |
| VDE registration number | 7030 |
| Application | For medium mechanical stress, fixed installation, occasional movement without tensile stress |
| Operating environment | dry and damp rooms |
| Flame retardancy | in accordance with EU Directive 305/2011 (BauPVO/CPR) |
| Construction | Flexible, reduced wall thicknesses |
| Resistance | resistant to acids, alkalis, conditionally oil-resistant |
The ÖLFLEX® CLASSIC 110 CY 4G2,5 control cable from Lapp is a flexible cable designed for use in industrial plants and machinery. It is designed for medium mechanical stress and is suitable for fixed installation as well as occasional movement without tensile stress. The cable is used in dry and damp rooms and is universally suitable for wiring internal machine and plant-wide control circuits. The PVC outer sheath offers resistance to acids and alkalis as well as conditional oil resistance, expanding its application possibilities in various industrial environments.
Applications
The cable is designed for applications requiring high mechanical load capacity and simultaneous flexibility. It is frequently used in the machine and plant construction industry, where control and signal transmissions occur between different components. Its use in dry and damp rooms also makes it suitable for environments with increased humidity, as long as there is no direct water exposure or aggressive chemicals. The cable is not intended for outdoor use or in highly corrosive environments.
Functions and Features in Detail
The ÖLFLEX® CLASSIC 110 CY 4G2,5 features a shielded construction with a copper braided shield that provides high coverage. This ensures effective protection against electromagnetic interference (EMV), which is particularly important for maintaining signal integrity in complex electrical systems. Conductor identification is done by numbers, simplifying wiring and maintenance. The cable is flexibly constructed to allow movement during occasional repositioning without tensile stress.
Technology Explained Simply
The cable is rated for an operating voltage of U0/U: 300/500 V, which is sufficient for most control and signal applications in industry. The test voltage is 4000 V, ensuring high electrical safety and qualifying the cable for demanding applications. The PVC outer sheath is designed with reduced wall thicknesses, making it space-saving and advantageous for installation in narrow conduits or cable ducts. The VDE registration number 7030 confirms tested quality and compliance with relevant standards.
Compatibility and Accessories
The cable is designed for use in control and signal systems requiring high EMV immunity. It can be combined with other components from the ÖLFLEX® range to ensure a consistent cabling system. The classification of fire behaviour is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification available on the LAPP website by article number. The cable is not intended for use in explosive atmospheres.
Installation and Mounting
Installation is done by fixed routing, with occasional movement without tensile stress being possible. The flexible construction facilitates installation in confined spaces. The cable should not be installed under tension to ensure its service life. Connection techniques typically involve terminals, connectors, or soldering, depending on the system requirements.
Operational Advantages
The cable offers high EMV immunity through the copper braided shield, minimizing interference in signal transmission. VDE-tested quality and the 4000 V test voltage ensure safe and reliable operation. The space-saving design with reduced wall thicknesses facilitates installation in tight conditions. Resistance to acids, alkalis, and conditional oil resistance expands its application possibilities in various industrial environments.