| General |
| Conductor cross section | 4G2,5 mm² |
| Operating voltage | 300/500 V |
| Test voltage | 4000 V |
| Degree of protection | shielded |
| Wire identification | numbers |
| Insulating material | PVC |
| VDE registration number | 7030 |
| Application | For medium mechanical stress, fixed installation, occasional movement without tensile stress |
| Flame retardancy | Classified according to EU Directive 305/2011 (BauPVO/CPR) |
| Chemical resistance | Resistant to acids and alkalis, conditionally oil-resistant |
| Construction | Flexible, reduced wall thicknesses |
The control cable ÖLFLEX® CLASSIC 110 CY 4G2,5 from Lapp is a flexible PVC control cable for use in industrial plants and machines. It is designed for medium mechanical stress and is suitable for fixed installation as well as occasional movement without tensile stress. The cable is supplied in a length of 50 metres and is universally applicable for wiring of machine-internal and plant-wide control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, enabling use in dry and damp rooms.
Applications
The cable is designed for applications requiring high mechanical stability and electrical reliability. It is particularly suitable for wiring in machine construction, manufacturing technology, and plant engineering, where it serves as a connection element between control devices, sensors, and actuators. Use in dry and damp rooms is possible, although the cable is not designed for permanent moisture or direct water exposure.
Functions and equipment in detail
The control cable features a 4-core copper conductor cross-section of 2.5 mm² (4G2.5), making it suitable for transmitting control signals and low power loads. The cores are numbered, enabling easy identification and wiring. A high-coverage copper braided shield provides effective protection against electromagnetic interference, which is particularly advantageous in electrically sensitive environments.
Technology explained simply
The cable is rated for a test voltage of 4000 V, ensuring high electrical safety. The operating voltage is U0/U: 300/500 V, which is sufficient for most control applications. The PVC outer sheath is designed with reduced wall thicknesses, saving space without compromising mechanical strength. The VDE registration number 7030 confirms quality tested according to German electrical and safety standards.
Compatibility and accessories
The control cable is universally applicable and can be connected with standard connectors, terminals, and other connection elements designed for a 2.5 mm² cross-section. Use in combination with other Lapp products, such as control cables or protection conduits, is possible, provided the mechanical and electrical requirements of the respective application are met.
Installation and mounting
The cable is intended for fixed installation and can be used for occasional movement without tensile stress. Installation typically involves routing through cable ducts, protection conduits, or direct attachment to machine or plant structures. The flexible structure facilitates installation, especially in tight bending radii.
Advantages in operation
The combination of high mechanical strength, electromagnetic shielding, and chemical resistance ensures reliable and long-lasting performance in industrial environments. The VDE-tested quality and classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) enhance safety and simplify conformity declaration during installation. The reduced wall thickness of the PVC sheath contributes to space saving, which is advantageous when wiring in confined spaces.