Lapp 1135018, EAN: 4044773098488

Lapp 1135018 ÖLFLEX-CLASSIC110CY18G0,5 control cable 0.5 mm²

Cables > Control line > Flexible Control lines

Lapp 1135018 ÖLFLEX-CLASSIC110CY18G0,5 control cable 0.5 mm²

Lieske Part No. 333599
Mfg Part No 1135018
EAN-Code 4044773098488
Manufacturer Lapp
Here only 7,51 EUR
8,94 EUR incl. VAT

Further information for Lapp 1135018 ÖLFLEX-CLASSIC110CY18G0,5 control cable 0.5 mm²

General
Number of cores18
Core cross section0,5 mm²
Operating voltage300/500 V
Test voltage4000 V
Degree of protectionshielded
Shielding materialCopper shield braid
Insulating materialPVC
Wire identificationnumbers
VDE registration number7030
Flame retardancyClassified according to EU Directive 305/2011 (BauPVO/CPR)
Operating conditionsFor medium mechanical stress, fixed installation, occasional movement without tensile stress
Chemical resistanceResistant to acids and alkalis, conditionally oil-resistant
Installation methodfixed, occasional movement without tension
FlexibilityFlexible
Wall thicknessesreduced
The control cable ÖLFLEX® CLASSIC 110 CY 18G0,5 from Lapp is a flexible, shielded cable designed for use in industrial control and signal applications. It is suitable for moderate mechanical stress and is used for fixed installation as well as occasional movement without tensile load. The cable is universally applicable for wiring internal machine and cross-system control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, enabling use in dry and damp environments. The cable is marked with a VDE registration number (7030) and complies with the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding classified fire behaviour.

Applications
ÖLFLEX® CLASSIC 110 CY 18G0,5 is designed for applications in industrial electrotechnics, particularly in machine and plant engineering. It is used where reliable signal and control transmission is required under moderate mechanical loads. The cable is suitable for use in dry and damp environments, with the PVC insulation providing chemical resistance to acids, alkalis, and conditionally also oil. The flexible construction allows for easy installation and mounting, especially in complex plant structures.

Functions and Equipment in Detail
The cable features 18 conductors, each with a cross-section of 0.5 mm², individually numbered for easy identification and wiring during operation. The conductors are surrounded by a copper braided shield with high coverage, providing effective protection against electromagnetic interference (EMV). VDE-tested quality ensures high electrical safety, including a test voltage of 4000 V. The reduced wall thickness of the outer sheath enables space-saving installation, particularly in tight routing conditions.

Technology Explained Simply
The construction of the control cable is based on PVC insulation material, which ensures both electrical insulation and mechanical stability. The 18 conductors, each with a 0.5 mm² cross-section, are designed for transmitting control and signal currents. The copper braided shield protects the conductors from external electromagnetic influences, which is especially important in environments with high interference levels. The test voltage of 4000 V significantly exceeds the operating voltage (U0/U: 300/500 V), ensuring high operational safety. The PVC insulation is resistant to acids and alkalis, extending the cable’s service life in industrial environments.

Compatibility and Accessories
The cable is designed for use in standard control systems and can be connected with common connectors, terminals, and other connection elements. The VDE registration number 7030 and classification according to EU Directive 305/2011 (BauPVO/CPR) allow its use in installations complying with current construction product regulations. The cable is not specifically designed for use in explosive environments, but for general industrial applications.

Installation and Mounting
The flexible construction of ÖLFLEX® CLASSIC 110 CY 18G0,5 allows for easy and quick installation. The cable can be routed in cable ducts, shafts, or on trays. Connections between conductors are made using suitable connectors or terminals. Installation does not require special tools, but proper securing and routing of the cable is necessary to avoid mechanical stress. The cable is not intended for use underwater or in highly corrosive environments.

Operational Advantages
The control cable offers high reliability in signal transmission, supported by the EMV shielding. VDE testing and classification according to BauPVO/CPR ensure compliance with current safety and quality standards. The reduced wall thickness enables space-saving routing, which is particularly advantageous in compact machine construction. The chemical resistance of the PVC sheath extends the cable’s service life in industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/333599
qrcode für Lapp 1135018 ÖLFLEX-CLASSIC110CY18G0,5 control cable 0.5 mm²