General
Degree of protection	shielded
Operating voltage	0,6/1 kV
Insulating material	PVC
Screening	Copper shield braid
Wire identification	numbers
Test voltage	4000 V
Outer sheath wall thickness	min. 1.8 mm
Number of cores	7
Cross-section per conductor	1,5 mm²
Cable type	control cable
Utilization	For fixed installation and occasional movement without tensile stress
Application range	for dry and damp rooms, outdoor use subject to temperature range
Chemical resistance	Resistant to acids and alkalis, conditionally oil-resistant
Flame retardancy	Classified according to EU Directive 305/2011 (BauPVO/CPR)

The ÖLFLEX® CLASSIC 110 CY BK 0,6/1 kV 7G1,5 control cable from Lapp is a flexible, shielded cable designed for use in industrial and technical installations. It is suitable for moderate mechanical stress and is used in circuits requiring higher nominal voltage due to installation conditions. The cable is intended for fixed installation and can be moved occasionally, provided no tensile stress is applied. It is universally applicable for wiring internal machine and cross-system control circuits. Due to its weather resistance, it is also suitable for outdoor use, provided the temperature range is observed.

Applications
This cable is designed for use in dry and damp rooms. It is used in industrial electrical engineering where high mechanical robustness and electrical safety are required. Applications include wiring control and signal circuits in machines, plants, and production environments. The PVC insulation is resistant to acids and alkalis and is conditionally oil-resistant, making it suitable for environments with chemical influences.

Functions and Features in Detail
The cable features conductor identification by numbering, which simplifies the assignment of individual conductors during wiring. The outer sheath is reinforced and has a minimum wall thickness of 1.8 mm, enhancing mechanical strength. Additionally, an extruded inner sheath is used, improving the overall robustness of the cable. The cable is equipped with a copper shielding braid that has a high coverage rate, providing effective protection against electromagnetic interference.

Technical Explanation
The nominal voltage is 0.6/1 kV, meaning the cable is designed for applications with higher electrical voltage. The test voltage of 4000 V ensures high electrical safety. The copper shielding braid protects the conductors against electromagnetic interference, which is particularly important in environments with strong electromagnetic fields. The PVC outer sheath offers chemical resistance and is suitable for outdoor use, as long as temperature limits are not exceeded.

Compatibility and Accessories
The cable is part of the ÖLFLEX CLASSIC 110 CY product series and can be combined with other variants of this series, such as models with 3G, 4G, 5G, 12G, or 18G conductors. Compatibility with other products in the series allows for flexible adaptation to different requirements.

Installation and Mounting
The cable is designed for fixed installation and can be moved occasionally without tensile forces acting on it. Installation typically involves routing in cable ducts, shafts, or trays. The mechanical strength of the outer sheath and reinforcement by the inner sheath facilitate installation and increase the cable’s service life.

Operational Advantages
The cable offers high electrical safety due to the 4000 V test voltage and effective protection against electromagnetic interference via the copper shielding braid. The weather resistance and chemical resistance of the PVC sheath enable use in various environments, including outdoors. Conductor numbering simplifies installation and maintenance. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), ensuring compliance with European Construction Products Regulation.

Protection rating, operating voltage, PVC, copper shielding braid, numbering, 0.6/1 kV are the key technical features determining the cable’s functionality and suitability for use.