General
Number of conductors	4 piece
Core cross section	1,0 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Degree of protection	oil resistant in accordance with DIN EN 50290-2-22 (TM54)
Wire identification	numbers
Insulating material	PVC
Working temperature	-15 °C
VDE registration number	7030

The control cable ÖLFLEX® CLASSIC 110 4X1,0 from Lapp is a flexible PVC control cable designed for use in industrial plants and machinery. It is designed for medium mechanical stress and is suitable for fixed installation as well as occasional movement without tensile stress. The cable construction also allows for flexible, continuously moving use in moving machine parts and in drag chains. The cable is flexible down to -15 °C and can be used in dry and damp rooms. The PVC outer sheath is resistant to acids and alkalis and offers proven resistance to ECOLAB® disinfectants and cleaning agents. The ÖLFLEX® CLASSIC 110 is oil-resistant according to DIN EN 50290-2-22 (TM54) and thus suitable for environments with oil and grease contact. The cable is universally applicable for wiring of machine-internal and plant-wide control circuits. The cable construction is also suitable for torsion applications in wind turbines. The VDE registration number 7030 confirms tested quality, and the cable meets the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding classified fire behaviour. Electrical safety is ensured by a test voltage of 4000 V. The reduced wall thicknesses ensure space-saving use. The conductors are numbered, enabling clear identification and assignment during wiring operations.

Control cable
The ÖLFLEX® CLASSIC 110 4X1,0 is a control cable with four conductors, each 1.0 mm² cross-section, designed for transmitting control signals in industrial plants. It is suitable for use in machine construction, manufacturing technology, and plant engineering, where reliable and flexible signal transmission is required. The cable is designed for an operating voltage of U0/U: 300/500 V, making it suitable for many standard applications in the field of control and signal technology.

Applications
The cable is designed for applications in industrial environments, particularly in machines with moving parts, such as drag chains or moving axes. It is also suitable for torsion applications in wind turbines. Resistance to acids, alkalis, and ECOLAB® cleaning agents makes it suitable for use in the food industry, pharmaceutical industry, or cleanroom environments. Oil resistance according to DIN EN 50290-2-22 (TM54) enables use in environments with oil and grease contact, such as in metalworking or machine construction.

Functions and equipment in detail
The control cable features a PVC outer sheath that is mechanically robust and chemically resistant. The conductors are numbered, simplifying wiring and maintenance. The cable is flexible and can be moved at temperatures down to -15 °C. The reduced wall thicknesses result in lower space requirements in cable ducts or drag chains. High electrical safety is ensured by a test voltage of 4000 V, guaranteeing reliable insulation even under load.

Technology explained simply
The ÖLFLEX® CLASSIC 110 4X1,0 is a flexible control cable with a PVC insulating and protective sheath. The four conductors, each with a cross-section of 1.0 mm², are numbered to enable clear assignment during wiring. The operating voltage of 300/500 V is sufficient for most control and signal applications in machine construction. The test voltage of 4000 V ensures that the insulation remains stable even under high electrical stress. Oil resistance according to DIN EN 50290-2-22 (TM54) means the cable is not damaged when in contact with mineral oils, hydraulic oils, or similar media. Resistance to acids and alkalis, as well as to ECOLAB® cleaning agents, makes the cable suitable for hygienic requirements.

Compatibility and accessories
For use with this control cable, the accessory YSLY-JZ 4G1,0 mm² 100 m ring Eca PVC control cable with numbered conductors is available. This cable is also designed for control applications and offers a comparable design with numbered conductors. Combining both cables can be beneficial in plants with different requirements, for example, when one cable is used for fixed installation and another for moving parts.

Installation and mounting
The control cable is designed for fixed installation and occasional movement without tensile stress. During installation, care should be taken to avoid excessive bending or pulling to maintain mechanical integrity. The flexible structure allows easy installation in drag chains or moving machine parts. The numbered conductors simplify assignment and wiring. The cable is suitable for use in dry and damp rooms, with ambient temperatures not falling below -15 °C.

Advantages in operation
The ÖLFLEX® CLASSIC 110 4X1,0 offers high reliability in industrial applications. Oil and chemical resistance reduces the risk of material damage due to environmental conditions. The flexible structure enables easy integration into moving machine parts. Numbered conductors simplify maintenance and fault diagnosis. Reduced wall thicknesses result in lower space requirements, which is advantageous when cable cross-section is limited. VDE testing and compliance with BauPVO/CPR Directive guarantee conformity with European safety standards.