General
Number of conductors	2 piece
Core cross section	0,5 mm²
Operating voltage	300/500 V
Insulating material	PVC
Wire identification	numbers
Oil resistance	according to DIN EN 50290-2-22 (TM54)
Test voltage	4000 V
VDE registration number	7030
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)
Working temperature	-15 °C
Application	For medium mechanical stress, fixed installation, occasional movement without tensile stress
Resistance	resistant to acids, alkalis, ECOLAB® disinfectants and cleaning agents
Cable construction	for flexible, continuously moving use in moving machine parts and drag chains
Utilization	in dry and damp rooms, machine internal and plant-wide control circuits
Torsion applications	suitable for wind turbines
Space-saving	by reduced wall thicknesses

The control cable ÖLFLEX® CLASSIC 110 2X0,5 from Lapp is a flexible PVC control cable for use in industrial plants and machines. It is designed for medium mechanical stress and is suitable for both fixed installation and occasional movement without tensile stress. The cable construction also allows for flexible, continuously moving use in moving machine parts as well as in drag chains. The cable is suitable for use at temperatures down to -15 °C and can be used in dry and damp rooms. The PVC outer sheath is resistant to acids and alkalis, enabling application in chemically demanding environments. The control cable is universally applicable for wiring internal machine and plant-wide control circuits. Due to its special construction, it is also suitable for torsion applications in wind turbines.

Applications
ÖLFLEX® CLASSIC 1110 2X0,5 is designed for applications in industrial automation, machine and plant construction, as well as in energy technology. It is frequently used in moving machine parts, such as in drag chains or rotating components. The cable is also suitable for use in environments with increased mechanical stress, particularly when no continuous tensile stress occurs. Its resistance to ECOLAB® disinfectants and cleaning agents makes it suitable for applications in the food industry or in the medical technology sector.

Functions and equipment in detail
The cable features two conductors, each with a cross-section of 0.5 mm². The conductors are numbered, enabling easy identification and wiring. The PVC outer sheath is oil-resistant according to DIN EN 50290-2-22 (TM54), making the cable suitable for environments with oil and fat contact. The cable is VDE-tested and carries registration number 7030. High electrical safety is ensured by a test voltage of 4000 V. The reduced wall thicknesses allow for space-saving installation, especially in tight installation situations.

Technology explained simply
The control cable is designed for an operating voltage of 300/500 V, making it suitable for most control and signal applications in industry. The PVC insulation provides good electrical insulation and chemical resistance. The flexible structure of the cable allows movement without mechanical damage, as long as no tensile stress is applied. The classification of fire behaviour is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification available on the LAPP website by article number.

Compatibility and accessories
ÖLFLEX® CLASSIC 110 2X0,5 is part of an extensive product family with 145 standard articles, covering conductor counts from 2 to 100. The cable is available in standard lengths as well as in individual cuts, enabling flexible adaptation to specific requirements. Use in combination with other products from the ÖLFLEX® range is possible, especially when a uniform installation system is desired.

Installation and mounting
The cable is intended for fixed installation and can be used for occasional movement without tensile stress. Installation is carried out in the usual manner for control cables, taking into account mechanical stresses during operation. The flexible structure requires no special mounting techniques, although the manufacturer’s recommended bending radius should be observed to avoid damage.

Advantages in operation
The control cable offers high reliability under medium mechanical stress. The oil- and chemical-resistant PVC sheath ensures long service life in demanding environments. The space-saving construction with reduced wall thicknesses allows compact installation, which is particularly advantageous in tight machine components. The VDE testing and fire behaviour classification according to EU Directive 305/2011 (BauPVO/CPR) guarantee high safety standards in operation.