General
Number of cores	5 piece
Core cross section	6 mm²
Operating voltage	300/500 V
Degree of protection	Flexible
Wire identification	numbers
Insulating material	PVC
Oil resistance	according to DIN EN 50290-2-22 (TM54)
Test voltage	4000 V
Flexible temperature range	-15 °C
Resistance	resistant to acids, alkalis, ECOLAB® cleaning agents
VDE registration number	7030
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)

The control cable ÖLFLEX® CLASSIC 110 5G6 from Lapp is a flexible PVC control cable with five conductors, each 6 mm² cross-section, designed for use in industrial plants and machinery. It is designed for medium mechanical stress and is suitable for fixed installation as well as occasional movement without tensile stress. The cable construction also allows for flexible, continuously moving use in moving machine parts and in drag chains. The cable is flexible for use at temperatures down to -15 °C and can be used in dry and damp rooms. The PVC outer sheath is resistant to acids and alkalis and offers proven oil resistance according to DIN EN 50290-2-22 (TM54). Conductor identification is done by numbering, ensuring secure assignment during wiring operations.

Applications
ÖLFLEX® CLASSIC 110 5G6 is universally applicable for wiring internal machine and plant-wide control circuits. It is particularly suitable for applications in the manufacturing industry, for moving machine parts, and in drag chains. Due to its cable construction, it is also suitable for torsion applications in wind turbines. The cable is available in standard lengths as well as individual cuts, enabling flexible adaptation to different requirements.

Functions and Equipment in Detail
The control cable features high electrical safety, ensured by a test voltage of 4000 V. The PVC sheath is space-saving due to reduced wall thickness, offering advantages during installation. The cable is tested for resistance to ECOLAB® disinfectants and cleaning agents, making it suitable for applications with high hygiene requirements. The VDE registration number 7030 confirms the tested quality according to VDE standards.

Technology Explained Simply
The control cable is designed for an operating voltage of U0/U: 300/500 V, making it suitable for use in industrial control and signal systems. The flexible structure allows movement without mechanical damage, even with repeated use. Numbering of the conductors simplifies installation and maintenance, as assignment during wiring remains unambiguous. Oil resistance according to DIN EN 50290-2-22 (TM54) protects the cable from wear caused by industrial oils and greases.

Compatibility and Accessories
Accessories for this control cable include YSLY-JZ 5G6 mm² Eca PVC control cable with numbered conductors. This is also suitable for control applications and can be used in similar application scenarios. Combination with suitable connectors or protective conduits is possible depending on the application, with the exact selection tailored to the specific requirements at the installation site.

Installation and Mounting
The cable is designed for fixed installation and occasional movement without tensile stress. During installation, care should be taken to avoid excessive bending or pulling to maintain service life. The reduced wall thickness of the PVC sheath facilitates installation in confined spaces. Wiring is typically done in machine cable channels, control boxes, or drag chains.

Operational Advantages
ÖLFLEX® CLASSIC 110 5G6 offers high reliability under medium mechanical load. The tested resistance to aggressive chemicals and oils ensures long service life. Clear conductor identification and space-saving construction simplify installation and maintenance. VDE-tested quality and classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) meet safety and environmental compatibility requirements in industrial plants.