General
Cable type	control cable
Manufacturer	Lapp
Number of cores	5
Core cross section	2,5 mm²
Operating voltage	300/500 V
Insulating material	PVC
Wire identification	numbers
VDE registration number	7030
Oil resistance	according to DIN EN 50290-2-22 (TM54)
Test voltage	4000 V
Working temperature	-15 °C
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)
Resistance	resistant to acids, alkalis, ECOLAB® cleaning agents
Application range	for medium mechanical stress, fixed installation, occasional movement, drag chains, torsion applications in wind turbines

The control cable ÖLFLEX® CLASSIC 110 5G2,5 from Lapp is a flexible, oil-resistant cable for use in industrial plants and machines. It features five conductors, each with a cross-section of 2.5 mm², and is designed for an operating voltage of 300/500 V. The cable is equipped with a PVC outer sheath, providing high mechanical and chemical resistance. The conductors are numbered, enabling clear identification and assignment during wiring operations. The VDE registration number 7030 confirms tested quality and compliance with applicable standards.

Applications
The cable is suitable for medium mechanical stress and can be used for fixed installation as well as for occasional movement without tensile stress. It is designed for use in moving machine parts and in drag chains, making it suitable for continuously moving applications. Notably, it is suitable for torsion applications in wind turbines. The cable can be used in dry and damp rooms and is suitable for flexible applications at temperatures down to -15 °C.

Functions and Features in Detail
The PVC outer sheath is resistant to acids, alkalis, and ECOLAB® disinfectants and cleaning agents. The cable is oil-resistant according to DIN EN 50290-2-22 (TM54), making it suitable for environments with oil and grease contact. The reduced wall thicknesses ensure a space-saving design, which is advantageous in tight installation situations. High electrical safety is ensured by a test voltage of 4000 V, guaranteeing reliable insulation and protection.

Technology Explained Simply
The control cable is designed for use in control and signal transmission systems. The five conductors with a 2.5 mm² cross-section enable powerful and reliable signal transmission. The PVC insulation provides good electrical insulation and mechanical stability. The numbered conductor identification simplifies installation and maintenance, as each conductor can be uniquely assigned. The cable is universally applicable for use in internal machine and plant-wide control circuits.

Compatibility and Accessories
The cable is part of an extensive product family with 145 standard items, available with 2 to 100 conductors in various lengths and as individual cuts. Combining it with other products from the ÖLFLEX® CLASSIC series enables a consistent wiring solution. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with exact article number selection available on the LAPP website.

Installation and Mounting
The cable is designed for fixed installation and occasional movement without tensile stress. Its flexible structure allows for easy installation in machines and plants. The reduced wall thicknesses facilitate installation in confined spaces. The cable is suitable for use in moving machine parts and drag chains, ensuring reliable performance in dynamic applications.

Operational Advantages
The control cable offers high mechanical and chemical resistance, enabling long service life and low maintenance frequency. The oil-resistant PVC insulation protects against wear caused by oils and greases. The tested resistance to cleaning agents makes the cable suitable for hygienically demanding environments. The space-saving design and high electrical safety contribute to reliability and efficiency in operation.