General
Number of conductors	36
Wire identification	numbers
Operating voltage	300/500 V
Test voltage	4000 V
Degree of protection	PVC
Oil resistance	DIN EN 50290-2-22 (TM54)
Flame retardancy	EU Directive 305/2011 (BauPVO/CPR)
VDE registration number	7030
Temperature range	-15 °C

The control cable ÖLFLEX® CLASSIC 110 36G1 from Lapp is a flexible, oil-resistant cable for use in industrial plants and machinery. It features 36 individual conductors with a cross-section of 1.0 mm², each numbered to enable clear identification within the wiring system. The cable is designed for medium mechanical stress and is suitable for fixed installation as well as occasional movement without tensile load. The PVC outer sheath provides protection against acids, alkalis, and ECOLAB® disinfectants and cleaning agents, enabling use in clean production environments or in the medical technology sector. The cable is suitable for use in dry and damp rooms and can be flexibly used down to a temperature of -15 °C.

Applications
ÖLFLEX® CLASSIC 110 36G1 is universally applicable for wiring internal machine and plant-wide control circuits. It is particularly suitable for movable machine parts, drag chains, and torsion applications, such as those found in wind turbines. The cable’s construction allows for continuous, flexible use under these conditions. It is designed for industrial environments where high mechanical and chemical resistance is required.

Functions and Features in Detail
The cable has a VDE registration number 7030, confirming its tested quality and compliance with applicable standards. The conductors are numbered, simplifying identification and wiring within the system. The PVC insulation and outer sheath are designed to provide high mechanical strength and chemical resistance. The cable is oil-resistant according to DIN EN 50290-2-22 (TM54), ensuring safe use in environments with oil and grease contact.

Technology Explained Simply
The operating voltage is U0/U: 300/500 V, qualifying the cable for typical control and signal applications in industry. The test voltage of 4000 V ensures high electrical safety and prevents breakdowns under load. The reduced wall thickness of the PVC sheath enables a space-saving design, which is advantageous when installing in tight construction gaps or in drag chains. The fire behaviour classification follows EU Directive 305/2011 (BauPVO/CPR), with the exact classification available on the LAPP website by article number.

Compatibility and Accessories
The cable is part of an extensive product family with 145 standard items, covering conductor counts from 2 to 100. It is available in standard lengths as well as individual cuts, enabling flexible adaptation to specific requirements. It can be used in combination with other ÖLFLEX® products, especially in systems requiring high mechanical and chemical resistance.

Installation and Mounting
The cable is designed for fixed installation and occasional movement without tensile load. Its flexible structure allows easy installation in drag chains and movable machine parts. The numbered conductors simplify installation and maintenance, as the assignment within the system remains clear. Installation is carried out in dry and damp rooms, with a temperature limit of -15 °C.

Operational Advantages
ÖLFLEX® CLASSIC 110 36G1 offers high reliability due to its VDE-tested quality and oil resistance. The reduced wall thickness ensures a space-saving design, which is beneficial when installing in tight construction gaps. Resistance to acids, alkalis, and disinfectants makes the cable suitable for demanding environments. The combination of flexibility, mechanical strength, and chemical resistance ensures long service life and low maintenance requirements during operation.