General
Number of cores	21
Core cross section	0,75 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Insulating material	PVC
Wire identification	numbers
Oil resistance	DIN EN 50290-2-22 (TM54)
VDE registration number	7030
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)
Working temperature	-15 °C
Utilization	For fixed installation and occasional movement without tensile stress
Resistance to acids and alkalis
Resistance to ECOLAB® cleaning agents
Use in drag chains
Use in torsion applications
Reduced wall thickness

The control cable ÖLFLEX® CLASSIC 110 21G0.75 from Lapp is a flexible PVC control cable for use in industrial plants and machines. It features 21 conductors with a cross-section of 0.75 mm² and is designed for an operating voltage of 300/500 V. The cable is suitable for medium mechanical stress and can be used for flexible movements down to -15 °C. It is designed for fixed installation as well as for occasional movements without tensile stress. The cable construction also allows for continuous moving use in moving machine parts and in drag chains. The PVC insulation and outer sheath are resistant to acids and alkalis and are suitable for use in dry and damp rooms. The cable is universally applicable for wiring of machine-internal and plant-wide control circuits. The cable construction is also suitable for torsion applications in wind turbines. The Ölflex® CLASSIC 110 is oil-resistant according to DIN EN 50290-2-22 (TM54) and offers high electrical safety through a test voltage of 4000 V. The reduced wall thicknesses ensure space-saving use. The cable is VDE-tested and has registration number 7030. The classified fire behaviour corresponds to EU Directive 305/2011 (BauPVO/CPR), with article number selection available on the LAPP website. The conductors are numbered, enabling easy identification and wiring. The cable is tested for resistance to ECOLAB® disinfectants and cleaning agents.

Control cable
The ÖLFLEX® CLASSIC 110 21G0.75 is a control cable designed for transmitting control signals in industrial plants. It is suitable for use in machines, plants, and automation systems where reliable and flexible signal transmission is required. The cable is suitable for a wide range of applications, particularly in environments with medium mechanical load.

Applications
The cable is suitable for use in dry and damp rooms and can be used in moving machine parts, drag chains, and in plants with torsional stress, such as in wind turbines. It is designed for fixed installation as well as for occasional movements without tensile stress. The operating temperature ranges down to -15 °C, making it suitable for colder environments.

Functions and equipment in detail
The cable features 21 conductors with a cross-section of 0.75 mm², which are numbered to enable easy identification. The PVC outer sheath is resistant to acids, alkalis, and ECOLAB® cleaning agents. The Ölflex® CLASSIC 110 is oil-resistant according to DIN EN 50290-2-22 (TM54), making it suitable for environments with oil and grease contact. The reduced wall thicknesses ensure space-saving use, especially in tight installation situations.

Technology explained simply
The control cable is designed for an operating voltage of 300/500 V and features a test voltage of 4000 V, ensuring high electrical safety. The VDE test and registration number 7030 confirm the quality and reliability. The classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) ensures compliance with the European Construction Products Regulation. The cable is suitable for flexible movements down to -15 °C, making it usable in colder operating environments.

Compatibility and accessories
The ÖLFLEX® CLASSIC 110 21G0.75 is universally applicable and can be used in various industrial plants and machines. The cable is suitable for use in drag chains and moving machine parts. The numbered conductors facilitate wiring and compatibility with various control and automation systems.

Installation and mounting
The cable is designed for fixed installation as well as for occasional movements without tensile stress. The flexible structure enables easy installation in confined spaces. The reduced wall thicknesses facilitate installation, especially in complex wiring situations. The numbered conductors support precise and error-free wiring.

Operational advantages
The ÖLFLEX® CLASSIC 110 21G0.75 offers high electrical safety through the 4000 V test voltage and is oil-resistant according to DIN EN 50290-2-22 (TM54). Resistance to acids, alkalis, and ECOLAB® cleaning agents ensures long service life and reliability. The reduced wall thicknesses ensure space-saving use, making installation in confined spaces easier. The VDE test and registration number 7030 guarantee the quality and reliability of the cable. The cable is suitable for flexible movements down to -15 °C, making it usable in colder operating environments. The numbered conductors facilitate wiring and maintenance.

Control cable, Ölflex® CLASSIC 110, PVC, Oil resistance, VDE-tested, Fire behaviour according to EU Directive 305/2011