General
Number of cores	18 piece
Core cross section	0,75 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Degree of protection	Flexible
Wire identification	numbers
Insulating material	PVC
Outer sheath material	PVC
Oil resistance	DIN EN 50290-2-22 (TM54)
Resistance	resistant to acids, alkalis, ECOLAB® disinfectants and cleaning agents
Operation temperature	-15 °C
VDE registration number	7030
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)

The control cable ÖLFLEX® CLASSIC 110 18G0,75 from Lapp is a flexible control cable for use in industrial plants and machines. It features 18 conductors with a cross-section of 0.75 mm² and is designed for an operating voltage of 300/500 V. The cable is equipped with a PVC outer sheath, offering high mechanical strength and chemical resistance. The conductors are numbered, enabling easy identification and wiring. The cable is suitable for medium mechanical stress and can be used flexibly, with an operating temperature down to -15 °C. It is designed for fixed installation as well as occasional movement without tensile stress. The cable construction also allows for continuous moving applications in moving machine parts and in drag chains. The PVC insulation is resistant to acids, alkalis, and ECOLAB® disinfectants and cleaning agents. The cable is suitable for use in dry and damp rooms and is universally applicable for wiring internal machine and plant-wide control circuits. The cable construction is also suitable for torsion applications in wind turbines. The cable complies with VDE registration number 7030 and is VDE-tested. Oil resistance corresponds to the standard DIN EN 50290-2-22 (TM54). The classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) is selectable via the LAPP website by article number. High electrical safety is ensured by a test voltage of 4000 V. Reduced wall thicknesses enable space-saving installation. The cable is available in 145 standard articles with 2 to 100 conductors in common lengths, as well as in individual cuts.

Control cable ÖLFLEX® CLASSIC 110 18G0,75 is designed for use in industrial environments where high mechanical and chemical resistance is required. It is particularly suitable for applications in machine and plant engineering, where flexible and moving installations are necessary. The cable is suitable for use in moving machine parts, drag chains, and in wind turbines, where torsional stresses may occur. Its universal applicability enables wiring of control circuits within machines and across plants. Resistance to acids, alkalis, and disinfectants makes it suitable for applications in the food industry or in the medical sector, where hygiene and cleaning are important.

Functions and equipment in detail include a flexible construction with 18 conductors, each having a cross-section of 0.75 mm². The conductors are numbered, facilitating precise assignment and wiring. The PVC outer sheath provides protection against mechanical stress and chemical influences. The cable is designed for an operating voltage of 300/500 V and features a test voltage of 4000 V, ensuring high electrical safety. The reduced wall thicknesses of the sheath result in a more compact cross-section and allow for space-saving installation. The cable is designed for fixed installation and occasional movement without tensile stress, with an operating temperature down to -15 °C.

Technology explained simply shows that the cable consists of a PVC sheath protecting the conductors from external influences. The conductors themselves are insulated with PVC material and numbered to enable easy identification. The flexible construction allows movement of the cable without causing mechanical damage. Oil resistance according to DIN EN 50290-2-22 (TM54) means the cable can be used in environments with oil and grease contact without impairing its electrical properties. Resistance to ECOLAB® products is particularly relevant for applications in the food and hygiene industries. The test voltage of 4000 V is a measure of electrical insulation strength and ensures safe operation.

Compatibility and accessories refers to use in various industrial applications. The cable is universally applicable and can be used in combination with other components of the LAPP ÖLFLEX® program. Wiring of control circuits in machines and plants is possible, and the cable can also be used in drag chains and moving machine parts. Its torsion resistance makes it suitable for applications in wind turbines. Availability in 145 standard articles with 2 to 100 conductors allows flexible selection according to requirements.

Installation and mounting typically involves fixed installation, although the cable is also suitable for occasional movement without tensile stress. The flexible construction allows installation in moving machine parts and drag chains. Numbered conductors facilitate wiring and assignment of individual cables. The reduced wall thicknesses of the PVC sheath enable space-saving installation, which is particularly advantageous in confined machine spaces. The cable is suitable for use in dry and damp rooms, allowing it to be used in environments with high humidity.

Operational advantages include high mechanical and chemical resistance, enabling long service life and low maintenance frequency. The flexible construction allows for continuous moving applications, supporting use in moving machine parts and drag chains. Oil resistance and resistance to acids, alkalis, and disinfectants make the cable suitable for demanding industrial environments. High electrical safety, ensured by the 4000 V test voltage, guarantees safe operation. The space-saving construction with reduced wall thicknesses enables efficient installation in confined spaces. Universal applicability and availability in various configurations increase flexibility in planning and installing control cables.