General
Cable type	control cable
Manufacturer	Lapp
Number of conductors	12
Core cross section	2,5 mm²
Screening	Copper shield braid
Wire identification	numbers
Outer sheath material	PUR
Operating voltage	300/500 V
Application range	Conveyor chain, moving machine parts
Performance class	Core Line
Bending radius	small
Inner sheath	Extruded

The control cable ÖLFLEX® FD CLASSIC 810 CP 12G2,5 from Lapp is a flexible, shielded cable designed for use in moving machine parts and drag chains. It features a PUR outer sheath that is mechanically robust and chemically resistant, particularly insensitive to mineral oil-based lubricants. The cable is designed for control, regulation, and measurement circuits and is suitable for dry, wet, rough, and oil-containing environments. Due to its construction, it is also suitable for outdoor use, provided the specific temperature limits are observed.

Applications
This cable is designed for continuous moving applications, for example in drag chains or moving machine parts. The LAPP performance class 'Core Line' ensures long-term operation under medium travel distances or increased accelerations. The high mechanical load capacity and the abrasion-, nick-, and cut-resistant PUR outer sheath make it particularly suitable for demanding industrial environments.

Functions and equipment in detail
The cable construction enables flexible and durable use under movement. The conductor stranding is shorter, allowing very small bending radii and increasing flexibility. Conductor identification is done by numbers, enabling easy assignment and wiring. An extruded inner sheath provides additional robustness and improves the mechanical stability of the cable.

Technology explained simply
The cable is equipped with a copper braided shield with high coverage. This provides effective protection against electromagnetic interference, which is important for signal integrity in control and regulation systems. The PUR outer sheath is not only abrasion-resistant but also resistant to mechanical impacts such as cuts or nicks. The combination of highly flexible construction and robust sheath material ensures a long service life under dynamic operating conditions.

Compatibility and accessories
The cable is designed for use in control, regulation, and measurement systems. It is rated for an operating voltage range of U0/U: 300/500 V, making it suitable for a wide range of industrial applications. Use in drag chains and moving machine parts is ensured by the special cable construction and material selection.

Installation and mounting
Due to its high flexibility and small bending radii, the cable can be installed in tight bends. Installation follows standard procedures for flexible control cables, taking into account mechanical loads and environmental conditions. Conductor identification by numbers simplifies wiring and assignment of individual conductors.

Advantages in operation
The cable is characterised by high mechanical robustness, chemical resistance, and electromagnetic shielding. Its long service life under moving conditions and suitability for oil-containing and rough environments make it a reliable solution in industry. The combination of flexible construction and high-quality materials ensures a long operational life and low maintenance requirements.