General
Construction	H05VV5-F
Number of conductors	3
Core cross section	1,5 mm²
Operating voltage	300/500 V
Insulating material	PVC
Wire identification	numbers
Oil resistance	enhanced according to DIN EN 50363-4-1 (TM5)
Test mark	¿HAR¿
Colour	Grey
Application	For medium mechanical stress, fixed installation, occasional movement without tensile stress
Operating environment	dry, moist, oil-containing
Resistance	Resistant to acids and alkalis

The ÖLFLEX 140 3G1.5 control cable from Lapp is a flexible cable of type H05VV5-F, designed for wiring in industrial applications. It is suitable for medium mechanical stress and is used for fixed installation as well as for occasional movements without tensile stress. The cable is particularly suitable for applications where oily environments, dry or moist conditions prevail. The PVC outer sheath provides resistance to acids and alkalis, increasing operational safety in various production environments. The cable is universally applicable for machine internal and plant-wide control circuits.

Applications
ÖLFLEX 140 3G1.5 is designed for industrial applications requiring high mechanical load capacity and chemical resistance. It is commonly used in machine construction, manufacturing technology, and plant engineering, particularly in areas with oil or grease contact. The cable is designed for fixed installation but can also be used for occasional movements without tensile stress. Its suitability for oily environments is ensured by enhanced oil resistance according to DIN EN 50363-4-1 (TM5).

Functions and Features in Detail
The cable features three conductors, each with a cross-section of 1.5 mm², with conductor identification by numbers. This enables clear assignment of individual conductors during wiring. The type H05VV5-F is harmonized and complies with European standards, facilitating use in various countries. The ¿HAR¿ test mark confirms the cable’s tested safety and quality, which is important for use in industrial plants.

Technology Explained Simply
The control cable is rated for an operating voltage of 300/500 V, making it suitable for typical control and signal transmission tasks in industry. The PVC sheath provides not only mechanical protection but also chemical resistance, particularly against oils, acids, and alkalis. The flexible structure of the cable allows for easy installation, even in tight or curved runs. The enhanced oil resistance according to DIN EN 50363-4-1 (TM5) ensures that the cable retains its electrical properties even with prolonged contact with oily media.

Compatibility and Accessories
ÖLFLEX 140 3G1.5 is universally applicable and can be connected with standard cable glands, connectors, and other connection elements suitable for PVC insulation. Use in machine and plant engineering often requires combination with other control cables or signal transmission cables, where the harmonized type H05VV5-F enables compatible integration.

Installation and Mounting
The cable is intended for fixed installation and can be routed in cable ducts, switch cabinets, or machine structures. For occasional movements, it must be ensured that no tensile stress occurs. The flexible structure facilitates installation, especially in tight bends. Conductor identification by numbers supports correct assignment during installation.

Operational Advantages
ÖLFLEX 140 3G1.5 offers high reliability in industrial environments due to its chemical resistance and mechanical robustness. The harmonized type H05VV5-F and the ¿HAR¿ test mark ensure recognized quality accepted in many European countries. The enhanced oil resistance according to DIN EN 50363-4-1 (TM5) extends the cable’s service life in oily environments and reduces maintenance requirements.