General
Number of cores	16 piece
Core cross section	0,5 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Insulating material	PVC
Wire identification	Colours
Operating conditions	Fixed installation, occasional movement without tensile stress
Application areas	Internal machine and cross-system control circuits, wind turbines (torsion applications)
Chemical resistance	Resistant to acids and alkalis, conditionally oil-resistant
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)

The control cable ÖLFLEX® CLASSIC 100 16G0,5 from Lapp is a flexible cable designed for use in industrial plants and machinery. It is designed for moderate mechanical stress and is suitable for fixed installation as well as occasional movement without tensile load. The cable is used in dry and damp rooms and is universally suitable for wiring of internal machine and plant-wide control circuits. The PVC outer sheath offers resistance to acids and alkalis and is conditionally oil-resistant. The cable construction is also suitable for torsion applications in wind turbines.

Applications
This control cable is designed for applications in industrial electrical engineering, particularly in machine building, manufacturing technology, and plant construction. It is used to connect control and switching devices where a flexible yet robust cable is required. Due to its resistance to chemical influences and suitability for torsion applications, it is also usable in wind energy technology.

Functions and Equipment in Detail
The cable features 16 conductors with a cross-section of 0.5 mm², colour-coded to enable easy identification and wiring. The PVC outer sheath is flexible and provides good protection against mechanical stress. The cable is rated for an operating voltage of 300/500 V, making it suitable for typical control and signal circuits in industry. The reduced wall thicknesses ensure a space-saving construction, which is advantageous when installing in tight construction gaps or machine enclosures.

Technology Explained Simply
The control cable is equipped with a test voltage of 4000 V, ensuring high electrical safety. The test voltage indicates how well the insulation withstands electrical voltage during operation without breaking down. The classification of fire behaviour is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification determinable via article number selection on the LAPP website. Thus, the cable is intended for use in components and plants subject to the requirements of this directive.

Compatibility and Accessories
The control cable is designed as a high-quality alternative to control cables of type YSLY or YY. It can be used in existing installations as a replacement or supplement where these types have previously been used. Compatibility results from similar electrical and mechanical properties as well as the use of PVC as insulating and protective sheath material.

Installation and Mounting
The cable is intended for fixed installation and can be moved occasionally, provided no tensile stress occurs. Installation is carried out in the usual manner for control cables, with the flexible conductors and PVC sheath enabling easy installation. The cable is not intended for use in moving parts with continuous tensile or torsional stress, but for applications with occasional movement without tension. Installation takes place in dry and damp indoor environments.

Operational Advantages
The control cable offers high electrical safety due to the 4000 V test voltage and is resistant to acids, alkalis, and conditionally oil-resistant. The reduced wall thicknesses allow for space-saving installation, which is beneficial when installing in compact machines or plants. The colour-coded conductor identification simplifies wiring and maintenance. The cable is described as universally applicable and offers broad application possibilities in various industrial sectors.