| General |
| SFP standard | SFP |
| Ethernet standard | 1000BASE-SX |
| Wavelength | 850 nm |
| Maximum cable length | 550 m |
| Fibre cable type | Multimode Fiber |
| Fibre core diameter | 50/125 µm |
| Connector | LC Connector |
| Maximum data transfer rate | 1 GBit/s |
| Operation mode | Full-Duplex |
| Colour | Silver |
| Number of SFP modules included | 10 |
The LANCOM SFP-SX-LC1 is a network transceiver module specifically designed for use in LANCOM switches, routers, and firewalls with integrated SFP ports. It enables fiber optic networking according to the 1000BASE-SX standard and serves as a modular extension for connecting network devices via multimode fiber cables. The module is designed for use in local area networks (LAN) where high data transfer rates and reliable connections over medium distances are required.
Applications
This module is suitable for networks using multimode fiber cables with core diameters of 50/125 µm (maximum cable length 550 m) or 62.5/125 µm (maximum cable length 300 m). It is used in environments requiring a fiber optic connection with bandwidth up to 1 GBit/s and full-duplex operation. Typical applications include networking server rooms, office buildings, or between different buildings within a corporate campus.
Functions and Features in Detail
The module operates according to the 1000BASE-SX standard, optimized for transmission over multimode fiber cables. It uses a wavelength of 850 nm, which is particularly efficient for short to medium distances in fiber optic networks. The integrated LC connector ensures a secure and precise mechanical connection to the fiber cable. The maximum data transfer rate is 1 GBit/s, and full-duplex operation enables simultaneous data transmission in both directions without collisions.
Technology Explained Simply
The 1000BASE-SX standard is part of the Gigabit Ethernet protocol, specifically designed for multimode fiber cables. The designation SX stands for Short Wavelength, referring to the use of the 850-nm wavelength. This wavelength is particularly suitable for short to medium distances, as it offers high bandwidth and is compatible with common multimode fibers. The module is designed as an SFP module (Small Form-factor Pluggable), meaning it can be inserted into standardized SFP slots of network devices without requiring additional hardware or software modifications.
Compatibility and Accessories
The module is designed for LANCOM devices with integrated SFP ports and offers verified compatibility with these products. It is not intended for use with devices from other manufacturers or non-SFP-compatible equipment. Use requires multimode fiber cables with the specified core diameters (50/125 µm or 62.5/125 µm).
Installation and Mounting
Installation is performed by simply inserting the module into the SFP slot of the LANCOM device. No tools or additional effort are required. After insertion, the connection is automatically detected, and the network connection is established as soon as a compatible fiber cable is connected. The module color is silver, typical for network modules of this design.
Operational Advantages
Thanks to its modular design, the network can be flexibly expanded or adapted without replacing the entire device. The use of fiber optic cables offers higher bandwidths, lower signal losses, and immunity to electromagnetic interference compared to copper cables. Verified compatibility with LANCOM products ensures a stable and reliable connection without additional configurations.