Technical data
Colour	Black
Length	8m
Type	Hook-and-loop tape
Width	20mm

The LTC TOUGH TAPE STRAP from LABEL THE CABLE is a self-adhesive hook-and-loop fastener tape for securing padding, covers, tarpaulins, banners and signs both indoors and outdoors. The hook and loop strips are supplied as two separate rolls and can be cut to size. The strong acrylic adhesive reaches its maximum adhesive strength after 24 hours. The hook-and-loop fastening allows attached items to be removed and reattached repeatedly.
The 20 mm wide strips are also suitable for narrow surfaces such as frames and mouldings, and can be cut to size to form strips or pads. The hook-and-loop fastening holds attached objects together and can be opened and closed for reuse. Once the maximum adhesive strength has been achieved, the fastening is water- and weather-resistant and withstands rain, damp, heat and frost within the specified temperature range.
Areas of application
For securing cushions and pads to garden furniture or on boats, to camping equipment and mats, and to banners, tarpaulins and signs outdoors. It can also be used indoors to secure items such as power strips and heavy fabrics.
Application
Cut the hook-and-loop tape to the required length. Clean and dry the surface, peel off the protective film and press both strips firmly into place. Leave for 24 hours before subjecting the surface to full load. To remove an attached object, open the hook-and-loop fastening.
Features and technical specifications
2 rolls: 8 m hook-and-loop fastener (hook side) and 8 m hook-and-loop fastener (loop side)
Width: 20 mm each
Self-adhesive backing with strong acrylate adhesive
Can be cut to size with scissors
A hook-and-loop fastening that can be repeatedly opened and closed
Waterproof and weatherproof after 24 hours
Temperature resistance: −20 °C to +110 °C
Material: polyamide
Colour: Black
Package contents
1 roll of self-adhesive hook tape, 8 m × 20 mm, Black
1 roll of self-adhesive loop tape, 8 m × 20 mm, Black
Note: Only apply to clean, dry surfaces that are free from dust and grease, and press down firmly. Do not subject to full load until 24 hours have elapsed. The adhesive layer is designed for permanent fixings; the hook-and-loop fastening can be opened.