KTI SFP-GLS-20-A

KTI SFP-GLS-20-A SFP transceiver 20km SM

KTI SFP-GLS-20-A SFP transceiver 20km SM

Lieske Part No. 2117528
Mfg Part No SFP-GLS-20-A
EAN-Code
Manufacturer KTI
Here only 104,40 EUR
124,24 EUR incl. VAT

Further information for KTI SFP-GLS-20-A SFP transceiver 20km SM

General
Transceiver typeSFP
Transmit wavelength1310 nm
RX wavelength1310 nm
Transmission range20 km
Operation temperature0 to 70 °C
ConnectorLC
The KTI SFP-GLS-20-A is a Gigabit fibre optic SFP module designed for use in networks with single-mode fibre (SM). It serves as an optical transceiver for data transmission over fibre optic cables in the Gigabit Ethernet standard. The module is designed for a maximum range of 20 kilometres and uses wavelengths of 1310 nm for transmission (TX) and reception (RX), which is typical for long-haul fibre connections. The operating temperature ranges from 0 to 70 degrees Celsius, enabling use in indoor and outdoor applications under normal environmental conditions.

Gigabit fibre optic SFP module

The module is designed as an SFP (Small Form-factor Pluggable), a standard format for hot-swap transceivers used in switches, routers, and other network devices. The compact design allows for easy installation and replaceability without interrupting network operation. Connection is made via an LC connector, designed for single-mode fibre and ensuring a secure mechanical connection.

Applications

The module is suitable for networks in the field of data communication, particularly for backbone connections, campus networks, or connections between buildings. Due to its 20-km range and single-mode technology, it is ideal for applications requiring high bandwidth and low attenuation over long distances. The operating temperature of 0 to 70 °C also makes it suitable for environments with moderate conditions, such as server rooms, telecommunications centres, or industrial settings.

Functions and features in detail

The module transmits data in the Gigabit Ethernet standard (1000BASE-LX), with a data rate of 1000 Mbit/s. The use of single-mode fibre (SM) enables high signal quality and low attenuation, which is necessary for long distances. The wavelength of 1310 nm is standardised for long-haul fibre connections and ensures good compatibility with existing infrastructures. The LC connector is designed for a secure and precise optical connection.

Technology explained simply

An SFP module acts as a bridge between electrical signals in the network device and optical signals in the fibre cable. The module converts electrical data into light signals (transmitter) and receives light signals, converting them back into electrical signals (receiver). The use of single-mode fibre (SM) means that only a single light mode is transmitted through the cable, enabling lower attenuation and greater reach. The wavelength of 1310 nm falls within the range of minimal attenuation for single-mode fibre, increasing transmission efficiency.

Compatibility and accessories

The module is designed for devices that support SFP transceivers, particularly switches, routers, and other network devices in the Gigabit Ethernet range. It is compatible with single-mode fibre cables equipped with LC connectors. The use of appropriate cables is essential for a stable connection.

Installation and mounting

Installation is performed by simply inserting the module into the SFP slot of a compatible network device. No additional tools or configurations are required. The hot-swap capability allows for replacement without interrupting network operation. Connection to the fibre cable is made via the integrated LC connector, which is directly connected to the cable.

Operational advantages

The module provides reliable data transmission over 20 km at a speed of 1000 Mbit/s. The use of single-mode fibre ensures low signal loss and high bandwidth. The operating temperature of 0 to 70 °C allows flexible integration into various environments. The standardised SFP form factor ensures compatibility with a wide range of network devices and simplifies replacement and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117528
qrcode für KTI SFP-GLS-20-A SFP transceiver 20km SM