| General |
| Module type | SFP |
| Transmit wavelength | 850 nm |
| RX wavelength | 850 nm |
| Plug connection | LC |
| Transmission range | 500 m |
| Operation temperature | 0 to 70 °C |
The KTI SFP-GLM-A is a Gigabit fibre optic SFP module for use in networks with multimode fibre. It serves as a transceiver module for data transmission over fibre optic cables in the SX standard (Short Wavelength) and is specifically designed for use with multimode fibre (MM). The module enables data transmission over a range of up to 500 metres, with transmission via an LC connector. It is designed for use in networks requiring high bandwidth and reliability over medium distances, for example in corporate networks, data centres, or for connecting switches and routers within a building.
Gigabit fibre optic transceiver
The module supports a data rate of 1 Gigabit per second (Gbps) and is therefore suitable for use in Gigabit Ethernet networks. It uses a wavelength of 850 nm for both the transmit (TX) and receive (RX) units, which is typical for SX modules. This wavelength is optimal for multimode fibre, as it enables high bandwidth over moderate distances. The use of 850 nm ensures efficient signal transmission with low attenuation in multimode fibres.
Applications
The module is intended for indoor use, particularly in network infrastructures requiring stable and fast data transmission over medium distances. It is commonly used in switches, routers, or other network devices equipped with SFP slots. The 500-metre range makes it especially suitable for building cabling, campus networks, or for connecting servers in data centres, where cabling runs across multiple rooms or floors.
Functions and features in detail
The module is equipped with an LC connector, enabling a secure and precise connection to multimode fibre. The LC connector is standard in the IT and telecommunications industry and ensures a reliable mechanical and optical connection. The operating temperature of the module ranges from 0 °C to 70 °C, making it suitable for use in controlled indoor environments. It is not intended for outdoor use or extreme environmental conditions.
Technology explained simply
The SFP module functions as an optical transceiver, converting electrical signals into light signals (TX) and vice versa, converting light signals back into electrical signals (RX). The use of 850 nm wavelength in combination with multimode fibre enables high data rates over a range of up to 500 metres. The LC connection provides a compact and robust mechanical connection, which is standard in modern network devices. The module is compatible with Gigabit Ethernet protocols and can be used in devices with SFP slots.
Compatibility and accessories
The module is designed for use with multimode fibre cables equipped with LC connectors. It is compatible with network devices that support SFP slots, particularly switches and routers in the Gigabit Ethernet range.
Installation and mounting
Installation is performed by inserting the module into an SFP slot of a network device. The mechanical connection to the fibre is made via the LC connector, which is attached to the fibre cable. Correct alignment of the connector and a secure connection are essential for stable data transmission. No additional configuration is required, as the module is standardly designed for Gigabit Ethernet connections.
Advantages in operation
The module provides reliable and fast data transmission over multimode fibre with a range of 500 metres. The use of 850 nm wavelength ensures efficient signal transmission, and the LC connection guarantees a robust mechanical connection. The operating temperature range of 0 to 70 °C makes it suitable for use in typical indoor environments. It is compatible with a wide range of network devices supporting SFP slots and enables flexible network design.