| General |
| PoE standard | IEEE802.3af / IEEE802.3at |
| Output voltage | 9 V DC |
| Data transfer rate | 10/100/1000 Mbps |
| Connections | 1x PoE-In RJ-45, 1x LAN-Out RJ-45, 1x terminal block |
| DIP switch | 5 PoE classes |
| Temperature range | -20 to 70 Degrees Celsius |
| Mounting | DIN rail or wall mounting |
The KTI KPW-T2P25-9V /C is an industrial PoE splitter designed specifically for use in demanding environments. It enables the separation of data and power supply over a single Ethernet cable in accordance with the
IEEE802.3at standard. The device features a PoE input (PoE-In) and a separate LAN output (LAN-Out), with power supply provided via a terminal block at a voltage of
9V DC. The integrated support for the PoE standards
IEEE802.3af and
IEEE802.3at ensures compatibility with a wide range of PoE network devices having different power requirements.
Applications
The splitter is designed for industrial applications where reliable power and data transmission over existing network infrastructures is required. Typical use cases include powering IP cameras, industrial sensors, access control systems, or other PoE-enabled end devices in production environments, factories, or outdoor areas. The robust construction and extended temperature range of
-20 to 70 degrees Celsius make the device suitable for harsh environments where high or low temperatures may occur.
Functions and Equipment in Detail
The device features an RJ-45 connector for the PoE input, enabling data and power transmission over an Ethernet cable. The LAN output is also implemented via an RJ-45 port, establishing the data connection to the end device. Power supply is provided through a terminal block with an output voltage of
9V DC. An integrated
DIP switch allows selection from five different PoE classes, enabling the power supply to be adjusted to the specific requirements of the connected device. This increases flexibility and compatibility with various PoE end devices.
Technology Explained Simply
The PoE splitter operates on the principle of power and data decoupling. Over the Ethernet cable, both data transmission and power supply (PoE) are transmitted. The splitter separates these two components: data is forwarded via the LAN output, while electrical power is delivered via the terminal block as
9V DC. Support for the standards
IEEE802.3af and
IEEE802.3at ensures compatibility with both standard PoE (up to 15.4 W) and high-power PoE (up to 30 W). The integrated temperature resistance of
-20 to 70 degrees Celsius allows use in environments with extreme climatic conditions without affecting functionality.
Compatibility and Accessories
The splitter is compatible with all PoE sources supporting the standards
IEEE802.3af or
IEEE802.3at. The integrated PoE class selection via the DIP switch allows adaptation to various end devices requiring different power consumption classes. Mounting is optional, either on a DIN rail or on the wall, enabling flexible installation in various industrial environments.
Mounting and Installation
Installation is performed by connecting the PoE cable to the PoE-In port and connecting the end device to the LAN-Out port. Power supply is connected to the device via the terminal block. Mounting can be done either on a DIN rail or on the wall, with no specific tools or additional mounting accessories mentioned. Installation requires no special prerequisites, other than that the PoE source supports the required standards.
Advantages in Operation
Using the KTI KPW-T2P25-9V /C reduces the need for separate power supply cables, simplifying installation and reducing the number of cables in the network. The integrated PoE class selection allows precise adjustment to the requirements of the end device, increasing efficiency and reliability. The robust construction and extended temperature range ensure high operational safety in industrial environments. The option for DIN rail or wall mounting provides flexibility in positioning the device within the network.