| General |
| PoE standard | IEEE802.3af / IEEE802.3at - |
| PoE class selection | via DIP switch, 5 classes - |
| Operating temperature range | -20 to 70 °C |
| PoE-In connector | RJ-45 - |
| LAN-Out connector | RJ-45 - |
| DC-output | 12V DC |
| Data transfer rate | 10/100/1000 Mbps |
| Mounting options | DIN rail or wall mounting - |
The KTI Industrial Power over Ethernet Splitter 12V (Type KPW-T2P25-12V /C) is a network device for separating data and power supply in industrial applications. It enables the use of PoE technology (Power over Ethernet) in environments where a separate power supply for network devices is required. The device is designed for industrial environments and supports the PoE standards IEEE802.3af and IEEE802.3at, with the latter also covering high-power applications. The splitter features a PoE input (PoE-In) and a LAN output (LAN-Out), both via RJ-45 connectors, as well as a 12V-DC output via a terminal block. Power is transmitted over the Ethernet cable (PoE), reducing the need for additional power cables. The devices are designed for use in environments with high requirements for temperature stability, with an operating temperature range of -20 to 70 degrees Celsius.
Applications
The splitter is designed for industrial applications where network devices such as IP cameras, sensors, industrial controls, or other PoE-enabled end devices are powered and supplied with data via a single Ethernet cable. Installation is either on a DIN rail or on a wall, enabling flexible mounting in enclosures or on walls in production environments. The robust construction and extended temperature range make the device suitable for use in factories, warehouses, or outdoor areas where high mechanical stress or extreme temperatures may occur.
Functions and Equipment in Detail
The device features an RJ-45 connector for the PoE input, which receives data and power from a PoE switch or PoE injector. The second RJ-45 connector serves as the LAN output, forwarding data to the connected device. The 12V-DC output is provided via a terminal block, designed for direct connection to an external device. An integrated DIP switch allows selection from five different PoE classes, enabling the power supply to be adjusted to the specific requirements of the connected device. This is particularly useful when connecting various PoE end devices with different power requirements.
Technology Explained Simply
The splitter operates based on PoE technology (Power over Ethernet), where power and data are transmitted over the same Ethernet cable. The splitter separates these two components: data is forwarded via the LAN output, while electrical power is supplied via the terminal block as 12V-DC. Support for IEEE802.3af and IEEE802.3at standards ensures compatibility with a wide range of PoE sources, with IEEE802.3at enabling higher power levels. The PoE class selection via the DIP switch allows precise adjustment of the power supply to avoid overloads and optimize efficiency. The operating temperature range of -20 to 70 degrees Celsius indicates suitability for industrial environments with high thermal loads.
Compatibility and Accessories
The device is compatible with PoE sources supporting IEEE802.3af or IEEE802.3at standards. The PoE class selection via the DIP switch allows adaptation to various end devices. The RJ-45 connectors are designed for standard Ethernet cables, with Cat5e or higher recommended to ensure data transfer rates up to 1000 Mbps (Gigabit Ethernet). Mounting options (DIN rail or wall) offer flexibility for installation in various industrial environments.
Mounting and Installation
Installation is either on a DIN rail or on a wall. Wiring is done via standard Ethernet cables on the RJ-45 connectors and via an appropriate cable on the terminal block for the 12V-DC supply. Setup is performed using the DIP switch to select the PoE class, which must be adjusted according to the requirements of the connected device.
Operational Advantages
Using the splitter reduces the number of required cables, as power and data are transmitted over a single Ethernet cable. This simplifies installation and maintenance, especially in industrial environments with limited space. The ability to select the PoE class via the DIP switch enables flexible use for various end devices. The robust construction and extended temperature range ensure reliable operation even under challenging environmental conditions. Mounting options (DIN rail/wall) offer flexibility in positioning within an enclosure or on a wall.
Protection Rating
The specified operating temperature range of -20 to 70 degrees Celsius indicates a robust construction suitable for industrial applications. The mounting options (DIN rail/wall) allow flexible installation in enclosures or on walls.
PoE Technology
PoE technology (Power over Ethernet) enables the transmission of power and data over the same Ethernet cable. The splitter separates these two components, forwarding data via the LAN output and providing power via the terminal block as 12V-DC. Support for IEEE802.3af and IEEE802.3at standards ensures compatibility with a wide range of PoE sources.
DIP Switch
The integrated DIP switch allows selection from five PoE classes, enabling the power supply to be adjusted to the specific requirements of the connected device. This is particularly useful when connecting various PoE end devices with different power requirements.
Operating Temperature Range
The extended operating temperature range of -20 to 70 degrees Celsius indicates suitability for industrial environments with high thermal loads. The device can therefore be used in factories, warehouses, or outdoor areas where extreme temperatures may occur.
RJ-45 Connectors
The RJ-45 connectors are designed for standard Ethernet cables and support data transfer rates up to 1000 Mbps (Gigabit Ethernet). The use of Cat5e or higher is recommended to ensure maximum bandwidth.
Terminal Block
The 12V-DC output is provided via a terminal block, designed for direct connection to an external device.
Mounting Options
Mounting is either on a DIN rail or on a wall. Installation requires no additional tools, with mounting options offering flexibility in positioning within an enclosure or on a wall.
Compatibility
The device is compatible with PoE sources supporting IEEE802.3af or IEEE802.3at standards. The PoE class selection via the DIP switch allows adaptation to various end devices. The RJ-45 connectors are designed for standard Ethernet cables, with Cat5e or higher recommended to ensure data transfer rates up to 1000 Mbps (Gigabit Ethernet).
Application Areas
The splitter is designed for industrial applications where network devices such as IP cameras, sensors, industrial controls, or other PoE-enabled end devices are powered and supplied with data via a single Ethernet cable. The robust construction and extended temperature range make the device suitable for use in factories, warehouses, or outdoor areas where high mechanical stress or extreme temperatures may occur.