Further information for KTI KPW-D48T24-60 DC-DC converter 60W
General
Input voltage
44-60 VDC
Output voltage
24 VDC
Maximum output current
2,5 A
Maximum power
60 W
Degree of protection
Galvanic isolation
Temperature range
-30 to +70 °C
Norm
EN60950-1 UL
Mounting method
DIN rail mounting
Overload protection
Short-circuit-proof
The DC-DC converter from KTI, type KPW-D48T24-60, is an electronic voltage conversion device for step-down conversion, i.e. reducing a higher input voltage to a lower output voltage. It is used to power devices requiring 24 VDC from an input voltage range of 44 to 60 VDC. The galvanic isolation between input and output ensures electrical insulation, which is important for safety in industrial applications. The converter is designed for use in technical systems where stable and safe voltage conversion is required, for example in automation technology, machine building or industrial control systems.
Applications
The converter is suitable for industrial applications where a constant 24-volt DC voltage is required from a higher DC source. Typical applications include powering control devices, sensors, relays, display instruments or communication modules in machines and plants. The operating temperature range of -30 °C to +70 °C makes it suitable for outdoor use or harsh environments, provided ambient conditions remain within these limits. Compliance with standard EN60950-1 UL ensures electrical safety and is required for use in many countries.
Functions and equipment in detail
The converter converts input voltages between 44 and 60 VDC into a stable output voltage of 24 VDC. The maximum output power is 60 watts, corresponding to a maximum output current of 2.5 amperes. These values are sufficient for powering multiple consumers or a single device with higher current demand. The converter features overload protection, which protects it from damage due to excessive load, as well as short-circuit resistance, enabling safe operation even in case of incorrect connections. Galvanic isolation ensures electrical separation between input and output circuits, increasing safety and minimizing interference.
Technology explained simply
Step-down conversion is achieved through an electronic circuit that regulates the input voltage down to the desired output level via switching control. Galvanic isolation is implemented using a transformer, which electrically isolates the circuits. This is particularly important to ensure the safety of operation and connected devices. The operating voltage range of 44 to 60 VDC covers typical voltages in industrial DC networks, such as those from battery systems, solar installations or industrial power supplies. The output voltage of 24 VDC is a standard voltage in automation technology and is used by numerous control and sensor units.
Temperature range
The operating temperature range of -30 °C to +70 °C allows use in a wide range of environments, from air-conditioned indoor spaces to outdoor installations or machines with high heat generation.
Compatibility and accessories
The converter is equipped with a mounting bracket for DIN rail installation, enabling simple and standardized installation in enclosures. DIN rail mounting is common in industrial electrical engineering and allows quick integration into existing systems.
Mounting and installation
Mounting is done via the integrated bracket on a DIN rail structure, as commonly used in enclosures. Electrical connections are made via the terminal clamps on the device, designated for input and output voltages. Installation takes place in a closed enclosure to ensure electrical safety and environmental conditions.
Advantages in operation
Operation of the converter is particularly safe due to integrated protection functions such as overload and short-circuit resistance. Galvanic isolation increases safety and reduces interference. DIN rail mounting enables quick and flexible integration into existing systems. The operating voltage range of 44 to 60 VDC makes it compatible with many industrial DC networks, while the output voltage of 24 VDC is a standard voltage in automation technology. The maximum power of 60 watts is sufficient for many applications in industrial electronics.