KTI KGS-2422-8FX-W3520

KTI KGS-2422-8FX-W3520 8-Port Fast Ethernet fiber module WDM

KTI KGS-2422-8FX-W3520 8-Port Fast Ethernet fiber module WDM

Lieske Part No. 2117790
Mfg Part No KGS-2422-8FX-W3520
EAN-Code
Manufacturer KTI
Here only 1.066,24 EUR
1.268,83 EUR incl. VAT

Further information for KTI KGS-2422-8FX-W3520 8-Port Fast Ethernet fiber module WDM

General
Number of ports8
Plug connectionSC
Transmission wavelength (Tx)1310 nm
Reception wavelength (Rx)1550 nm
Transmission range15-20 km
CompatibilityKGS-2422-x
WDM technologyYes
The KTI fibre optic module KGS-2422-8FX-W3520 is an 8-port Fast Ethernet module, specifically developed for integration into the KGS-2422-x series of network devices. It enables data transmission over fibre optic cables in the single-mode (SM) range and supports bidirectional communication over distances of 15 to 20 kilometres. The module uses WDM technology (Wavelength Division Multiplexing), where transmission in both directions occurs over a single fibre optic cable, with the transmit frequency (Tx) at 1310 nm and the receive frequency (Rx) at 1550 nm. These wavelengths are standardised for single-mode connections and ensure high data integrity over long distances.

Applications

The module is designed for use in industrial and professional networks where a stable, long-distance connection via fibre optic cable is required. Typical applications include networking between locations in factories, buildings, or between buildings, where copper cables are no longer suitable due to distance or electromagnetic interference. The use of single-mode fibre optic cable enables high bandwidth and low attenuation, which is beneficial for critical applications such as SCADA systems or video surveillance.

Functions and Features in Detail

The module features eight independent ports, each equipped with an SC connector. These connectors are designed for single-mode fibre optic cables and provide a secure mechanical connection. The WDM technology ensures that each cable transmits data in both directions, reducing the number of cables required. The transmission rate is 100 Mbit/s per port, complying with the Fast Ethernet standard. The module is integrated into KGS-2422-x devices, with physical mounting achieved via a slot designated for such expansion modules.

Technology Explained Simply

WDM technology (Wavelength Division Multiplexing) allows simultaneous data transmission in both directions over a single fibre optic cable by using different light wavelengths. In the case of this module, the signal is transmitted at 1310 nm in the transmit direction (Tx) and received at 1550 nm (Rx). These wavelengths fall within the single-mode range, enabling low attenuation and high signal quality over distances up to 20 km. The SC connectors are robust and suitable for industrial environments, with mechanical stability and precise fibre alignment ensuring a reliable connection.

Compatibility and Accessories

The module is exclusively developed for the KGS-2422-x series from KTI and can only be operated in these devices. It is not compatible with other platforms or manufacturers. Use requires single-mode fibre optic cables with SC connectors. The cable connection is made directly between the module and the respective end device or switch.

Installation and Mounting

Installation is performed by inserting the module into the designated slot of the KGS-2422-x device. No additional mounting or fastening techniques are required, as the module is mechanically inserted into the device. The electrical connection is made via the device’s internal bus. After physical installation, network management configuration is required to activate the ports and set the desired network parameters. Installation is tool-free and typically completed within minutes.

Operational Advantages

Using this module enables efficient use of fibre optic cables, as only one cable is required per port, despite transmitting data in two directions. This reduces cable count and simplifies cabling. Transmission over single-mode fibre optic cable provides high reach and low signal loss, which is crucial for stable networks over long distances. Integration into the KGS-2422-x series allows for a scalable network architecture, enabling additional ports or functions to be added as needed.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117790
qrcode für KTI KGS-2422-8FX-W3520 8-Port Fast Ethernet fiber module WDM