KTI KGS-2422-8FM-W5320

KTI KGS-2422-8FM-W5320 8-Port FE/GbE fiber/copper module WDM

KTI KGS-2422-8FM-W5320 8-Port FE/GbE fiber/copper module WDM

Lieske Part No. 2117447
Mfg Part No KGS-2422-8FM-W5320
EAN-Code
Manufacturer KTI
Here only 896,00 EUR
1.066,24 EUR incl. VAT

Further information for KTI KGS-2422-8FM-W5320 8-Port FE/GbE fiber/copper module WDM

General
Number of ports8
Copper ports2
Copper port speed10/100/1000 Mbps
Fibre optic ports6
Fibre optic port connectorSC
Transmission wavelength (Tx)1550 nm
Reception wavelength (Rx)1310 nm
Transmission range15-20 km
CompatibilityKGS-2422-x
WDM technologyYes
The KTI module KGS-2422-8FM-W5320 is an 8-port Fast Ethernet and Gigabit fiber optic/copper module, specifically developed for integration into the KGS-2422-x switch series. It extends network connections by combining copper and fiber optic interfaces, with two RJ45 ports for copper connections and six fiber optic ports for transmission via single-mode fiber optic cables. This module unit thus enables connection of local devices via copper cables and remote sites via fiber optics, achieving a flexible network architecture.

Applications

The module is designed for networks requiring a combination of local copper connections and long-distance fiber optic links. Typical application scenarios include corporate networks with multiple locations, where the connection between headquarters and branch offices is made via fiber optics, while local end devices such as PCs, printers, or IP cameras are connected via copper cables. The WDM technology (Wavelength Division Multiplexing) allows the use of a single fiber optic cable for bidirectional data transmission, reducing cable count and improving infrastructure efficiency.

Functions and Equipment in Detail

The module features two RJ45 ports, each supporting data rates of 10/100/1000 Mbps. These ports are suitable for connecting end devices via copper cables and offer high flexibility in local network design. The six fiber optic ports are implemented as single-mode SC connectors and support transmission over distances of 15 to 20 km. The WDM technology is realized here with a transmit wavelength (Tx) of 1550 nm and a receive wavelength (Rx) of 1310 nm, enabling bidirectional communication over a single fiber optic cable. This configuration is particularly advantageous in scenarios where cabling is limited or costs for additional cables need to be minimized.

Technology Explained Simply

The WDM technology (Wavelength Division Multiplexing) enables simultaneous data transmission on different wavelengths over the same fiber optic cable. In this module, the transmit wavelength of 1550 nm is used for data transmission in one direction, and the receive wavelength of 1310 nm is used for the opposite direction. This allows bidirectional communication without additional cables. Single-mode fiber (SM) offers high bandwidth and low attenuation, enabling transmission over the specified distances of 15 to 20 km. The SC connector is a standardized, robust, and easy-to-handle connection system widely used in fiber optic communication.

Compatibility and Accessories

The module is specifically developed for the KGS-2422-x switch series from KTI and is intended for use in these devices. It is not designed for other switch models or manufacturers. Installation requires mounting in a compatible switch enclosure, with physical installation via module slots. Single-mode fiber optic cables with SC connectors are required for connecting the fiber optic ports. Combining with other modules from the KGS-2422 series enables modular network expansion, with the overall configuration adaptable according to requirements.

Installation and Mounting

Installation is performed by inserting the module into the corresponding module slot of the KGS-2422-x switch. Physical mounting is simple and requires no additional tools. After installation, the module is automatically recognized and integrated. Configuration is done via the switch’s network management software, with ports activated by default. RJ45 ports are wired using standard copper cables (Cat 5e or higher), while fiber optic ports must be connected using single-mode fiber optic cables with SC connectors.

Operational Advantages

The combination of copper and fiber optic interfaces in one module offers high flexibility in network design. The use of WDM technology reduces the number of required fiber optic cables, simplifying installation and reducing costs. Transmission via single-mode fiber enables stable and reliable data transmission over distances up to 20 km, which is particularly beneficial for connecting distributed sites. Integration into the KGS-2422-x series ensures a consistent network architecture with uniform management and configuration.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117447
qrcode für KTI KGS-2422-8FM-W5320 8-Port FE/GbE fiber/copper module WDM