KTI KGS-2422-8FM-W3520

KTI KGS-2422-8FM-W3520 8-Port FE/GbE fiber/copper module WDM

KTI KGS-2422-8FM-W3520 8-Port FE/GbE fiber/copper module WDM

Lieske Part No. 2117215
Mfg Part No KGS-2422-8FM-W3520
EAN-Code
Manufacturer KTI
Here only 896,00 EUR
1.066,24 EUR incl. VAT

Further information for KTI KGS-2422-8FM-W3520 8-Port FE/GbE fiber/copper module WDM

General
Number of ports8 piece
Copper ports2 piece
Fibre optic ports6 piece
Copper port speed10/100/1000 Mbps
Fibre optic port technologyWDM -
Fibre optic connectorSC -
Fibre optic transmission range15-20 km
Transmission wavelength1310 nm
Receiving wavelength1550 nm
CompatibilityKGS-2422-x -
The KTI KGS-2422-8FM-W3520 is an 8-port Fast Ethernet and Gigabit fiber optic/copper module, specifically developed for use in KGS-2422-x network switches. It serves as an expansion module for integrating fiber optic and copper connections into existing network infrastructures. The combination of copper and fiber optic connections enables flexible connection of various devices and systems, with the fiber optic ports designed for longer transmission distances and higher resistance to interference.

Applications

The module is designed for networks requiring a mix of copper and fiber optic connections, for example in industrial environments, building cabling, or for connecting sites over greater distances. The fiber optic ports with Single-Mode (SM) technology and SC connectors are designed for transmission distances of 15 to 20 km, making them particularly suitable for connecting buildings or sites within a campus network. The copper ports enable connection of end devices such as PCs, printers, or IP cameras via standard network cables.

Functions and Equipment in Detail

The module features a total of eight ports: two RJ45 ports for 10/100/1000 Mbps copper connections and six fiber optic ports for Fast Ethernet. The two copper ports support Gigabit Ethernet (1000 Mbps) and are thus suitable for high data rates. The six fiber optic ports use WDM technology (Wavelength Division Multiplexing) with single-mode fibers and SC connectors. Transmission occurs in the wavelength range Tx: 1310 nm (transmit) and Rx: 1550 nm (receive), enabling bidirectional use over a single fiber optic cable. This configuration is typical for cost-effective, long-distance network connections.

Technology Explained Simply

WDM technology allows two independent data streams to be transmitted over a single fiber optic cable by using different light wavelengths (1310 nm and 1550 nm). This reduces the number of required cables and lowers installation costs. Single-mode fibers are designed for long distances, as they transmit only one light mode and thus exhibit lower attenuation losses. The SC connector is a standardized, robust, and easy-to-handle fiber optic connector widely used in many industrial and commercial applications.

Compatibility and Accessories

The module is specifically designed for integration into KGS-2422-x switches from KTI. It is not intended for other switch models or manufacturers. Compatibility with KGS-2422-x switches ensures seamless integration into existing networks. For connecting the fiber optic ports, appropriate single-mode fiber optic cables with SC connectors are required. The copper ports use standard network cables (Cat 5e or higher) for connecting end devices.

t
Installation and Mounting

Installation is performed by inserting the module into the corresponding slot of the KGS-2422-x switch. No additional tools or configurations are required, as it is designed as a plug-and-play module. The connections are clearly labeled, with the two RJ45 ports designated for copper connections and the six fiber optic ports for WDM connections. Mounting takes place within a closed switch enclosure, protecting the modules from mechanical influences.

Advantages in Operation

The combination of copper and fiber optic connections offers high flexibility in network design. The fiber optic ports enable reliable data transmission over distances up to 20 km, while WDM technology reduces the number of cables required. The copper ports ensure fast connection of end devices within the local network. Integration into KGS-2422-x switches enables a scalable network architecture that can adapt to growing requirements. The use of single-mode fibers and SC connectors ensures high stability and maintainability of the connections.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117215
qrcode für KTI KGS-2422-8FM-W3520 8-Port FE/GbE fiber/copper module WDM